aboutsummaryrefslogtreecommitdiff
path: root/hwdef-emisar-d4k-3ch.h (unfollow)
Commit message (Expand)AuthorFilesLines
2023-11-02reorganized project files (part 1)Selene ToyKeeper1-248/+0
2023-10-29applied new delay factor to other DSM builds, and some new DSM_* definesSelene ToyKeeper1-1/+9
2023-10-27converted noctigon-m44 to use PWM+DSM instead of PWM+PFM (dynamic PWM)Selene ToyKeeper1-2/+0
2023-10-13rewrote emisar-d4k-3ch to use delta-sigma modulation (PWM + DSM),Selene ToyKeeper1-8/+18
2023-08-25made custom 3H handler system work, added circular HSV ramping,Selene ToyKeeper1-0/+2
2023-08-24added emisar-d4k-3ch buildSelene ToyKeeper1-57/+77
2023-08-03fixed accidental reversal of two deprecated k9.3-tintramp model numbersSelene ToyKeeper1-2/+2
2023-08-03converted all K9.3 builds and D4Sv2-tintramp-fet (now emisar-2ch-fet)Selene ToyKeeper1-10/+18
2023-07-10refactored how channel modes are defined, and converted emisar-2ch buildSelene ToyKeeper1-36/+17
2023-04-29Noctigon KR4: updated to use new channel systemSelene ToyKeeper1-58/+57
2023-04-25updated D4Sv2-tintramp -> Emisar 2-channel build target ...Selene ToyKeeper1-67/+100
2023-04-17switched the rest of FSM + Anduril to use SPDX license headersSelene ToyKeeper1-4/+5
2022-04-14applied new phase-hack flags to other builds where relevantSelene ToyKeeper1-0/+3
2021-11-03fixed KR4-tintramp build (switch wasn't working) and added it to MODELSSelene ToyKeeper1-0/+2
2021-11-03added KR4-tintramp buildSelene ToyKeeper1-1/+2
2021-09-10added D4Sv2-tintramp-FET build, which uses a FET on one set of LEDs for turbo...Selene ToyKeeper1-6/+10
2021-09-08changed D4Sv2-tintramp from 255 to 511 for lowest PWM TOP value,Selene ToyKeeper1-2/+2
2021-09-08fixed D4Sv2-tintramp PWM_TOP (should be set to the value it needs during ther...Selene ToyKeeper1-2/+2
2021-09-08got D4Sv2 tint ramping to work, with dynamic PWM (PFM)Selene ToyKeeper1-8/+14
2021-09-07adjusted hwdef settings for tint-ramping D4Sv2Selene ToyKeeper1-17/+25
2021-09-07copied hwdef from K9.3 for new tint-ramping D4Sv2Selene ToyKeeper1-0/+0
2020-10-18nope, the pins weren't swapped... the wires on the prototype were reversedSelene ToyKeeper1-12/+12
2020-10-16swapped PWM1 and PWM3 channels on K9.3, because I may have had them backwardSelene ToyKeeper1-12/+12
2020-10-14got K9.3 2nd LEDs working (and modified FSM to allow this sort of thing)Selene ToyKeeper1-1/+1
2020-10-14configured K9.3 cfg (mostly), assigned a model number, fixed typo in hwdefSelene ToyKeeper1-2/+2
2020-10-14configured K9.3 hwdefSelene ToyKeeper1-34/+48
2020-10-14copied KR4 hwdef to K9.3Selene ToyKeeper1-0/+0
2020-07-08minor formatting cleanupSelene ToyKeeper1-2/+1
2020-07-08added Emisar D4v2.5 support (D4v2 with a KR4 driver, same as KR4 but with lig...Selene ToyKeeper1-3/+9
2020-04-29removed unused TEMP_CHANNEL thing from FSM-related codeSelene ToyKeeper1-2/+0
2020-04-26applied ADC rewrite updates to most recent build targetsSelene ToyKeeper1-1/+1
2020-03-06fixed the ADC channel for voltage measurementSelene ToyKeeper1-2/+2
2020-03-06KR4: added FET channel, measured output, calibrated rampSelene ToyKeeper1-3/+3
2020-03-05initial support for Noctigon KR4Selene ToyKeeper1-20/+31
2019-11-25renamed Emisar D1S V2 -> Noctigon K1Selene ToyKeeper1-3/+4
2019-11-25calibrated Noctigon K1, changed voltage divider calibration values to 10-bit ...Selene ToyKeeper1-2/+4
2019-09-28remapped D1S V2 pins to match new driverSelene ToyKeeper1-16/+16
2019-08-06un-hardcoded 255 as the highest PWM level, and used a "PWM_TOP" value insteadSelene ToyKeeper1-0/+1
2019-08-05fixed voltage measurement on D1S v2Selene ToyKeeper1-3/+21
2019-07-30fsm-ramping: turn opamp chip on and off automatically based on ramp levelSelene ToyKeeper1-1/+2
2019-07-30added an early version of Emisar D1S v2 hwdef and cfg filesSelene ToyKeeper1-0/+113
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-28 20:00:14 +0000