aboutsummaryrefslogtreecommitdiff
path: root/spaghetti-monster (follow)
Commit message (Expand)AuthorAgeFilesLines
* fixed eeprom_wl functions on attiny1634Selene ToyKeeper2020-05-141-10/+10
* fixed build of "momentary" example UISelene ToyKeeper2020-05-142-2/+1
* fixed build when USE_GOODNIGHT_MODE not enabledSelene ToyKeeper2020-05-141-0/+14
* merged Noctigon KR4 and K1-12V (XHP35) branchesSelene ToyKeeper2020-04-2711-22/+254
|\
| * calibrated K1 and K1-12V thermal response (smaller, slower) and candle mode (...Selene ToyKeeper2020-04-272-2/+16
| * set default thermal response magnitude back to how it was before the KR4 upda...Selene ToyKeeper2020-04-272-2/+3
| * applied ADC rewrite updates to most recent build targetsSelene ToyKeeper2020-04-261-12/+0
| * merged Noctigon KR4 branch, including recent ADC+thermal rewriteSelene ToyKeeper2020-04-2628-420/+501
| |\
| | * added tweakable thermal_response_magnitude option, adjusted KR4 thermal vars,...Selene ToyKeeper2020-04-192-12/+12
| | * made thermal response larger when error is large, smaller when error is smallSelene ToyKeeper2020-04-191-2/+8
| | * KR4-noFET: made candle mode vary more since the ramp is stretched out, raised...Selene ToyKeeper2020-04-191-2/+5
| | * anduril: made aux RGB rainbow mode speed configurable per build targetSelene ToyKeeper2020-04-191-1/+4
| | * added a Noctigon KR4 219 (75% FET) build targetSelene ToyKeeper2020-03-281-0/+11
| | * Noctigon KR4 needed tighter/faster thermal response, and Hank wants RGB rainb...Selene ToyKeeper2020-03-261-1/+3
| | * made thermal regulation use a smaller target window, and prioritize cooling moreSelene ToyKeeper2020-03-261-3/+3
| | * added dynamic underclocking to KR4 to increase moon runtime, fixed ramp miles...Selene ToyKeeper2020-03-212-15/+11
| | * fixed potential eeprom corruption after turning boost/opamp chip on/offSelene ToyKeeper2020-03-211-0/+16
| | * enabled soft factory reset on KR4, raised default floor to the lowest reliabl...Selene ToyKeeper2020-03-202-2/+4
| | * added reboot() support for tiny1634Selene ToyKeeper2020-03-201-8/+10
| | * removed old thermal junk and voltage_lowpass junk from cfg filesSelene ToyKeeper2020-03-163-29/+0
| | * fixed calc_voltage_divider() (use 10-bit calibration values, not 8-bit)Selene ToyKeeper2020-03-161-1/+1
| | * merged fsm branch (to get adc-rework branch with new thermal regulation)Selene ToyKeeper2020-03-1623-401/+358
| | |\
| | * | added FETless KR4 build target, calibrated other KR4 therm faster level betterSelene ToyKeeper2020-03-162-2/+47
| | * | FET ramp was too steep; slowed it down by 50% (20 steps -> 30 steps)Selene ToyKeeper2020-03-061-11/+10
| | * | KR4: added FET channel, measured output, calibrated rampSelene ToyKeeper2020-03-061-2/+10
| | * | initial support for Noctigon KR4Selene ToyKeeper2020-03-053-0/+76
| * | | fixed eeprom corruption after turning boost chip on/offSelene ToyKeeper2020-02-271-0/+16
| * | | K1 12V needs party strobe slowed down even moreSelene ToyKeeper2020-02-261-1/+1
| * | | added support for boost PMIC enable pin (K1 12V has 2 pins which need to turn...Selene ToyKeeper2020-02-251-0/+6
| * | | Added template files for Noctigon K1 12V model.Selene ToyKeeper2020-02-251-0/+70
| |/ /
* | | added a noFET build for D4v2, by requestSelene ToyKeeper2020-04-132-1/+35
* | | recalibrated timing of nice_delay_ms() based on strobe speed measurements...Selene ToyKeeper2020-04-132-5/+5
* | | apparently the D1 can also be purchased with a D4v2 driver... so it's basica...Selene ToyKeeper2020-03-221-0/+17
* | | merged fsm branch, mostly to get new ADC code (thermal regulation and voltage...Selene ToyKeeper2020-03-1626-434/+359
|\ \ \ | |/ / |/| |
| * | removed more references to THERM_HARD_TURBO_DROPSelene ToyKeeper2020-03-164-19/+0
| |/
| * merged adc-rework branch, which rewrote all ADC code (voltage, temperature, a...Selene ToyKeeper2020-03-1622-399/+356
| |\
| | * fixed a few things in ramping-ui, rampingiosv3, and werner's UISelene ToyKeeper2020-03-163-14/+13
| | * merged some misc fixes from pakutrai, cleaned up comments, removed unused sym...Selene ToyKeeper2020-03-1615-87/+18
| | * increased blink speed slightly, and added a library function to blink out 16-...Selene ToyKeeper2020-03-161-3/+25
| | * deleted commented-out WDT code from previous revisionSelene ToyKeeper2020-03-161-7/+0
| | * cleaned up WDT ADC timer code slightly, and removed a bit of redundant codeSelene ToyKeeper2020-03-161-6/+8
| | * reduced regulation jitter by biasing errors toward zero by a constant amount,Selene ToyKeeper2020-03-161-1/+14
| | * the ADC sample count doesn't need to be 16-bit any more, and isn't really a c...Selene ToyKeeper2020-03-152-3/+4
| | * removed dead comments and dead codeSelene ToyKeeper2020-03-151-28/+2
| | * replaced temperature_timer (which wasn't even being used) with a variable del...Selene ToyKeeper2020-03-151-27/+43
| | * tried to make thermal code a bit less twitchy...Selene ToyKeeper2020-03-133-13/+19
| | * went back to continuous lowpass because it had the best noise reductionSelene ToyKeeper2020-02-282-52/+74
| | * brute force method for reducing ADC noise -- average a ridiculous number of s...Selene ToyKeeper2020-02-052-20/+14
| | * still doesn't work, but at least it's a bit less broken than before...Selene ToyKeeper2020-02-051-8/+12
| | * first pass at a smaller simpler thermal regulation algorithm...Selene ToyKeeper2020-02-051-75/+52
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-28 16:52:32 +0000