aboutsummaryrefslogtreecommitdiff
path: root/spaghetti-monster (follow)
Commit message (Expand)AuthorAgeFilesLines
* Noctigon KR4: updated to use new channel systemSelene ToyKeeper2023-04-295-24/+42
* just a todo note for laterSelene ToyKeeper2023-04-291-0/+1
* lockout mode: fixed manual memory timer and tint, added 3H next channel,Selene ToyKeeper2023-04-291-5/+23
* D4v2: tweaked ramp to make it smootherSelene ToyKeeper2023-04-281-9/+8
* D4v2 FET+1 model: works again, and now uses dynamic PWM (lower lows)Selene ToyKeeper2023-04-283-18/+72
* RGB aux: always preview in high mode, and show voltage during 3-second post-o...Selene ToyKeeper2023-04-281-4/+7
* changed lockout RGB aux default to blinking voltage, instead of blinking discoSelene ToyKeeper2023-04-281-1/+2
* only use 2-color strobe in tactical mode if it's on main LEDs, not auxSelene ToyKeeper2023-04-281-1/+4
* tactical mode: use police strobe by default, if it existsSelene ToyKeeper2023-04-271-2/+6
* Noctigon KR4-tintramp updated to use new channel systemSelene ToyKeeper2023-04-271-4/+4
* whitespace cleanupSelene ToyKeeper2023-04-261-5/+5
* change channel mode per config step in channel mode menuSelene ToyKeeper2023-04-264-6/+34
* made sleep voltage work on attiny1616 againSelene ToyKeeper2023-04-263-6/+31
* put RGB aux LEDs in high mode for 3 seconds after light goes to sleepSelene ToyKeeper2023-04-252-2/+4
* fixed bug behind K93_LOCKOUT_KLUDGE which could exit lockout in solid aux modeSelene ToyKeeper2023-04-2515-40/+16
* updated D4Sv2-tintramp -> Emisar 2-channel build target ...Selene ToyKeeper2023-04-253-13/+127
* added stepped tint rampingSelene ToyKeeper2023-04-199-52/+227
* LT1S Pro: added white-only auto-tint mode, at gchart's requestSelene ToyKeeper2023-04-191-6/+8
* made "Ramp 3H" do momentary turbo if current channel mode has no argsSelene ToyKeeper2023-04-173-16/+29
* LT1S Pro: raised the ramp a bit; it seemed too low in the middleSelene ToyKeeper2023-04-171-2/+9
* switched the rest of FSM + Anduril to use SPDX license headersSelene ToyKeeper2023-04-17131-1319/+534
* reduced ROM by ~600 bytes by moving all eeprom config values to a "cfg" structSelene ToyKeeper2023-04-1628-596/+572
* added ability to use 2 colors in config modeSelene ToyKeeper2023-04-153-49/+46
* enable sunset timer in Extended Simple UISelene ToyKeeper2023-04-151-1/+1
* adapted smooth-sunset patch from SammysHPSelene ToyKeeper2023-04-154-95/+41
* LT1S Pro: added manual memory with a timer by default, like on SP10 ProSelene ToyKeeper2023-04-151-0/+6
* merged gcharts config updates for BLF Q8 t1616Selene ToyKeeper2023-04-151-2/+11
* added gchart's Extended Simple UI (strobes and aux config in simple mode)Selene ToyKeeper2023-04-152-36/+81
* LT1S Pro: reduced visibility of PWM by dropping the TOP values fasterSelene ToyKeeper2023-04-151-9/+7
* LT1S: added thermal regulationSelene ToyKeeper2023-04-143-39/+51
* LT1S Pro: after measuring, perhaps low aux mode is better after allSelene ToyKeeper2023-04-141-2/+10
* LT1S Pro: added dynamic PWM (much better low modes!)Selene ToyKeeper2023-04-143-20/+22
* refactor progress checkpoint ... got Sofirn LT1S Pro and Emisar D4v2 workingSelene ToyKeeper2023-04-1326-443/+811
* merging gchart's changes, part 1...Selene ToyKeeper2023-04-0710-0/+309
* added a "tactical mode" on "Off -> 6C"Selene ToyKeeper2023-03-2823-4/+239
* strobe modes: added 4C to cycle backward through strobesSelene ToyKeeper2023-03-281-0/+6
* just whitespace / commentsSelene ToyKeeper2023-03-283-4/+4
* fast-blink the aux LED in standby when battery is lowSelene ToyKeeper2023-02-105-34/+54
* fixed voltage calibration resolution on SP10 ProSelene ToyKeeper2022-10-211-2/+2
* allow supporting single-color and RGB side button in the same buildSelene ToyKeeper2022-07-297-12/+46
* added Emisar D1v2 models (old FET+7135, new linear+FET, new linear-only)Selene ToyKeeper2022-07-294-6/+52
* sp10-pro: hard reset phase while turning off, fixes shutoff bug without a delaySelene ToyKeeper2022-04-141-8/+17
* moved fuses from cfg to hwdef, renamed LED_EN/DISABLE_DELAY to LED_ON/OFF_DELAYSelene ToyKeeper2022-04-142-32/+22
* merged gchart's latest changes:Selene ToyKeeper2022-04-144-1/+92
|\
| * Created LED_DISABLE_DELAY option and enabled it for SP10 Pro to hopefully eli...Gabriel Hart2022-04-132-1/+5
| * Added FUSES section to SP10 Pro for building ELF file with BOD Active fuse se...Gabriel Hart2022-04-122-4/+16
| * Merge from TK's main A2 branch thru Rev 647 which includes several patches fo...Gabriel Hart2022-04-1133-108/+635
| |\ | |/ |/|
* | revert spurious change to version.hSelene ToyKeeper2022-04-091-1/+4
* | merged sofirn sp10-pro branch (should have done it months ago, but forgot)Selene ToyKeeper2022-04-0915-45/+191
|\ \
| * \ merged anduril2 branch for upstream changesSelene ToyKeeper2021-12-1615-6/+272
| |\ \
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-28 20:05:23 +0000