aboutsummaryrefslogtreecommitdiff
path: root/spaghetti-monster (follow)
Commit message (Collapse)AuthorAgeFilesLines
* Merge in TK's repo thru revision 613Gabriel Hart2021-08-206-35/+53
|\
| * merged digitalcircuit's branch to make autolock timer configurable at build timeSelene ToyKeeper2021-08-191-1/+4
| |\
| | * add configurable #define DEFAULT_AUTOLOCK_TIMEShane Synan2021-07-121-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | Added a new #define DEFAULT_AUTOLOCK_TIME to simplify compiling firmware with the autolock timer enabled by default. If this is not specified, the autolock timer remains disabled by default. This removes the need to modify lockout-mode.h directly.
| * | merged digitalcircuit's anduril2_opt_disable_autocal_therm branch,Selene ToyKeeper2021-08-192-2/+14
| |\ \ | | | | | | | | | | | | allowing configs to disable the thermal autocalibration feature
| | * | added #define USE_THERM_AUTOCALIBRATE to opt outShane Synan2021-07-132-2/+14
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Moved factory reset thermal auto-calibration behind a new default-on config #define USE_THERM_AUTOCALIBRATE. Commenting this out or the usual #ifdef/#undef in a cfg-[...].h build file allows for manually calibrating the temperature offset. This may be useful for factory-calibrated temperature sensors or for those who regularly flash custom builds and don't want to recalibrate each time. Determining the correct temperature offset for a given flashlight first requires flashing a build with auto-calibrate disabled, using that to determine the offset, which can then be baked in to future firmware builds.
| * | made dynamic PWM phase-correct; replaced brute-force phase reset to avoid ↵Selene ToyKeeper2021-08-161-19/+22
| | | | | | | | | | | | | | | | | | | | | flickering (I didn't see any flickering on my lights, but SammysHP reported it was visible)
| * | set KR4 default floor higher at Hank's request,Selene ToyKeeper2021-08-142-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | and reduced the jump-start-moon power a bit too (he says both are good now, but I don't have hardware to measure it myself) The higher floor is because, when the driver is really hot from being on turbo, going directly to moon causes the LEDs to turn off for a while until the driver cools. The new floor is the lowest level where post-turbo activation works reliably. However, it should turn on even at the level 1/150 when it's not hot.
| * | calibrated KR4 jump-start-moon, may be too high on some older hardwareSelene ToyKeeper2021-08-122-2/+2
| | |
| * | KR4 thermal regulation no longer needs overrides, because dynamic PWM makes ↵Selene ToyKeeper2021-08-121-2/+3
| | | | | | | | | | | | | | | | | | | | | the defaults work better (the overrides were mostly needed as a side effect of having 1024 PWM steps instead of 256)
* | | from Tom E, support PB4 for any of the 3 PWM channelsGabriel Hart2021-08-201-1/+12
| | |
* | | Adjusted more Sofirn SP10 config values (party strobe, candle amp, max_1x7135)Gabriel Hart2021-08-152-3/+9
| | |
* | | Adjusted Sofirn SP10 ramp valuesGabriel Hart2021-08-152-2/+3
| | |
* | | Merge updates from TKs main branchGabriel Hart2021-08-1218-53/+230
|\| |
| * | got PFM / dynamic PWM actually working on Noctigon KR4Selene ToyKeeper2021-08-126-28/+83
| | | | | | | | | | | | | | | | | | (and also added "jump start moon" to it) (and generally finished adding dynamic PWM support to FSM)
| * | added a "jump start moon" option for hold-from-off, for lights with ↵Selene ToyKeeper2021-08-121-0/+13
| | | | | | | | | | | | | | | | | | slow-activating circuits (briefly pulses the light at a higher level to wake up the circuit faster)
| * | made blink_once() brightness configurable per buildSelene ToyKeeper2021-08-121-2/+5
| | |
| * | document the actual maximum for manual memory timer (~140 minutes, not 255)Selene ToyKeeper2021-08-122-1/+6
| | |
| * | added Nichia 219B build for KR4 and K9.3, adjusted 219C builds, for intl-outdoorSelene ToyKeeper2021-07-255-5/+38
| | |
| * | allow building only some targets, instead of always doing allSelene ToyKeeper2021-07-251-0/+13
| | |
| * | summarize results at end of batch build processSelene ToyKeeper2021-07-221-1/+30
| |/
| * rewrote hybrid memory (manual memory timer) to eliminate corner casesSelene ToyKeeper2021-07-111-15/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Old method: - at 1-click power-on, choose a brightness based on off-time (manual level or last-ramped level) New method: - when off longer than the timer, set last-ramped level to manual level This fixes a bug: - turn light off - wait for timer - turn light on with a shortcut to moon - turn light off - turn light on - pre-patch, light went to last-ramped level instead of manual level This change also reduces the ROM size slightly.
| * added Emisar D18 Nichia 219 build target (same as normal but reduced FET power)Selene ToyKeeper2021-07-112-0/+15
| |
| * set Emisar/Noctigon "219" builds to 65% FET powerSelene ToyKeeper2021-07-095-8/+20
| | | | | | | | | | | | (was 75% or 80% before) (change requested by Emisar)
* | Finalized SP10S and renamed to SP10 Pro. Updated Sofirn settings to include SOS.Gabriel Hart2021-08-126-42/+54
| |
* | Updating from TKs recent change (fix for compile without USE_SIMPLE_UI)Gabriel Hart2021-06-061-1/+9
|\|
| * added missing ifdefs for compiling without USE_SIMPLE_UISelene ToyKeeper2021-05-231-1/+9
| | | | | | | | | | (compiles now, but isn't tested on hardware)
* | Add config option to allow 3C smooth/stepped selection in Simple UI, add ↵Gabriel Hart2021-05-158-5/+58
|\| | | | | | | that option to the Sofirn configs
| * oops, somehow I forgot to add this earlier... Hank's UI preferences ↵Selene ToyKeeper2021-05-131-0/+21
| | | | | | | | (applies to all Emisar / Noctigon lights)
* | Merge recent updates from TK. Also update Sofirn target with preferences ↵Gabriel Hart2021-05-1435-136/+70
|\| | | | | | | from Barry - Simple UI uses max (150) for the ceiling and enable 2C Turbo.
| * made manual memory remember tint too, not just brightnessSelene ToyKeeper2021-05-075-17/+33
| |
| * aux LED config cleaning...Selene ToyKeeper2021-04-1426-107/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - use fancy blinking mode by default (define USE_OLD_BLINKING_INDICATOR if old slow mode is wanted) - remove TICK_DURING_STANDBY from all cfg-*.h files because it's enabled automatically by other features anyway (autolock, memory timer) - remove STANDBY_TICK_SPEED from cfg-*.h because all the values matched the default anyway so it was redundant - set rot66 button LED to high+blinking instead of high+off (it was only "off" because it ran out of space, and that was resolved) - enabled fancier indicator by default on fireflies-ui and rampingiosv3, since its other #define clauses were removed (not sure if those older UIs still compile, but if so, it's worth at least trying not to break it)
| * config updates for Hank (Emisar / Noctigon):Selene ToyKeeper2021-04-1312-7/+11
| | | | | | | | | | | | | | | | | | | | | | | | - use cycling rainbow mode by default on lights with RGB LEDs (instead of voltage, because it's better for impressing new users) - use 2C turbo instead of 2C ceiling (Anduril 1 style instead of Anduril 2 style) also some other minor housekeeping... - make all K1 models use consistent rainbow cycling speed - enable auto-lock and manual memory timer on Emisar D1v2 - remove redundant RGB config on Lume1 (it had incorrect comments anyway)
* | Update 1-Series to use 10 MHz clock and Phase Correct PWM. Add PWM ↵Gabriel Hart2021-05-042-4/+5
|/ | | | documentation. Also clear thermal offset on factory reset instead of setting it to 21*C.
* fixed missing ifdef for simple UISelene ToyKeeper2021-04-131-1/+4
|
* fixed wrong word in manual (turbo is in full UI only)Selene ToyKeeper2021-04-131-1/+1
|
* merged gchart's Tiny1 series branch for t1616 supportSelene ToyKeeper2021-04-0212-14/+416
|\
| * re-numbered t1616 builds to reflect manufacturer betterSelene ToyKeeper2021-04-025-8/+8
| | | | | | | | | | (all the Sofirn ones are pre-production builds intended to go on new Sofirn-produced hardware)
| * fixed blinking aux LED on gchart-fet1-t1616 (was fast and bright, now uses ↵Selene ToyKeeper2021-04-021-0/+5
| | | | | | | | 2-level heartbeat pattern)
| * reverted version.h back to generic originalSelene ToyKeeper2021-04-011-1/+4
| |
| * Renamed gchart-fet1-t16 to t1616, to make it consistent with other t1616 models.Selene ToyKeeper2021-04-012-2/+2
| |
| * slightly reorganized declaration of PCINT to make it easier to readSelene ToyKeeper2021-04-011-16/+10
| |
| * touched up a bit of formatting and a note for later optimizationSelene ToyKeeper2021-04-011-4/+7
| |
| * Merge TKs changes from 2021-01-25Gabriel Hart2021-02-0113-13/+325
| |\ | |/ |/|
* | updated MODELS file with missing K9.3-nofet build targetSelene ToyKeeper2021-01-251-0/+1
| |
* | removed redundant function call, added missing commentSelene ToyKeeper2021-01-252-4/+1
| |
* | bug pseudo-fix: K9.3 lockout mode failed in blinking single-color modeSelene ToyKeeper2021-01-252-0/+12
| | | | | | | | | | | | because of what appears to be compiler jank or a race condition or some other highly unusual issue (fixed by eating up extra clock cycles in the affected code path)
* | merged noctigon k9.3 branchSelene ToyKeeper2021-01-2412-12/+314
|\ \
| * | noctigon k9.3: default to aux RGB rainbow mode, and automatic memorySelene ToyKeeper2020-12-131-2/+3
| | |
| * | enabled memory timer and resetting tint after timeout on K9.3Selene ToyKeeper2020-10-223-2/+15
| | | | | | | | | | | | | | | (unsure if I'll keep it this way though, or if the old way was better)
| * | added K9.3-noFET build target (for models with E21A as main LEDs)Selene ToyKeeper2020-10-162-1/+55
| | |
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-29 02:38:14 +0000