aboutsummaryrefslogtreecommitdiff
path: root/spaghetti-monster (follow)
Commit message (Expand)AuthorAgeFilesLines
* converted Noctigon DM11-12V build, renamed to noctigon-dm11-boostSelene ToyKeeper2023-05-172-25/+28
* post-off voltage display: use low brightness when torch was at moon level bef...Selene ToyKeeper2023-05-027-12/+30
* added Wurkkos FC13 and TS11Selene ToyKeeper2023-05-023-2/+43
* post-off voltage display was slightly too long, default to 4s, not 5sSelene ToyKeeper2023-05-021-1/+1
* RGB buttons: while torch is on, use low mode below a configured levelSelene ToyKeeper2023-05-021-1/+2
* documented post-off voltage display configSelene ToyKeeper2023-05-021-57/+64
* converted Wurkkos TS25 build...Selene ToyKeeper2023-05-021-34/+45
* D4v2: added the rest of the aux RGB colors as channel modes,Selene ToyKeeper2023-05-023-3/+26
* made "post-off voltage display" user-configurable in battcheck 7H menu item 2Selene ToyKeeper2023-05-025-2/+29
* fixed bug: channel change could stick when activating a config menu from batt...Selene ToyKeeper2023-05-021-1/+15
* documented ramp 6C, ramp 4H, lockout 3H, and battcheck 3CSelene ToyKeeper2023-05-021-2/+15
* added ability to set channel mode for number readouts (batt check, temp check...Selene ToyKeeper2023-05-026-5/+39
* converted Wurkkos TS10 build (and made its ramp smoother w/ better low modes)Selene ToyKeeper2023-05-023-33/+64
* documented a couple recent changesSelene ToyKeeper2023-04-301-0/+4
* converted Emisar D4Sv2 build, and updated it to use dynamic PWMSelene ToyKeeper2023-04-291-26/+48
* converted KR4-nofet buildSelene ToyKeeper2023-04-291-5/+3
* KR4: ramp can use 8 bits, since values never go over 255Selene ToyKeeper2023-04-291-0/+5
* Noctigon KR4: updated to use new channel systemSelene ToyKeeper2023-04-295-24/+42
* just a todo note for laterSelene ToyKeeper2023-04-291-0/+1
* lockout mode: fixed manual memory timer and tint, added 3H next channel,Selene ToyKeeper2023-04-291-5/+23
* D4v2: tweaked ramp to make it smootherSelene ToyKeeper2023-04-281-9/+8
* D4v2 FET+1 model: works again, and now uses dynamic PWM (lower lows)Selene ToyKeeper2023-04-283-18/+72
* RGB aux: always preview in high mode, and show voltage during 3-second post-o...Selene ToyKeeper2023-04-281-4/+7
* changed lockout RGB aux default to blinking voltage, instead of blinking discoSelene ToyKeeper2023-04-281-1/+2
* only use 2-color strobe in tactical mode if it's on main LEDs, not auxSelene ToyKeeper2023-04-281-1/+4
* tactical mode: use police strobe by default, if it existsSelene ToyKeeper2023-04-271-2/+6
* Noctigon KR4-tintramp updated to use new channel systemSelene ToyKeeper2023-04-271-4/+4
* whitespace cleanupSelene ToyKeeper2023-04-261-5/+5
* change channel mode per config step in channel mode menuSelene ToyKeeper2023-04-264-6/+34
* made sleep voltage work on attiny1616 againSelene ToyKeeper2023-04-263-6/+31
* put RGB aux LEDs in high mode for 3 seconds after light goes to sleepSelene ToyKeeper2023-04-252-2/+4
* fixed bug behind K93_LOCKOUT_KLUDGE which could exit lockout in solid aux modeSelene ToyKeeper2023-04-2515-40/+16
* updated D4Sv2-tintramp -> Emisar 2-channel build target ...Selene ToyKeeper2023-04-253-13/+127
* added stepped tint rampingSelene ToyKeeper2023-04-199-52/+227
* LT1S Pro: added white-only auto-tint mode, at gchart's requestSelene ToyKeeper2023-04-191-6/+8
* made "Ramp 3H" do momentary turbo if current channel mode has no argsSelene ToyKeeper2023-04-173-16/+29
* LT1S Pro: raised the ramp a bit; it seemed too low in the middleSelene ToyKeeper2023-04-171-2/+9
* switched the rest of FSM + Anduril to use SPDX license headersSelene ToyKeeper2023-04-17131-1319/+534
* reduced ROM by ~600 bytes by moving all eeprom config values to a "cfg" structSelene ToyKeeper2023-04-1628-596/+572
* added ability to use 2 colors in config modeSelene ToyKeeper2023-04-153-49/+46
* enable sunset timer in Extended Simple UISelene ToyKeeper2023-04-151-1/+1
* adapted smooth-sunset patch from SammysHPSelene ToyKeeper2023-04-154-95/+41
* LT1S Pro: added manual memory with a timer by default, like on SP10 ProSelene ToyKeeper2023-04-151-0/+6
* merged gcharts config updates for BLF Q8 t1616Selene ToyKeeper2023-04-151-2/+11
* added gchart's Extended Simple UI (strobes and aux config in simple mode)Selene ToyKeeper2023-04-152-36/+81
* LT1S Pro: reduced visibility of PWM by dropping the TOP values fasterSelene ToyKeeper2023-04-151-9/+7
* LT1S: added thermal regulationSelene ToyKeeper2023-04-143-39/+51
* LT1S Pro: after measuring, perhaps low aux mode is better after allSelene ToyKeeper2023-04-141-2/+10
* LT1S Pro: added dynamic PWM (much better low modes!)Selene ToyKeeper2023-04-143-20/+22
* refactor progress checkpoint ... got Sofirn LT1S Pro and Emisar D4v2 workingSelene ToyKeeper2023-04-1326-443/+811
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-28 14:48:13 +0000