1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
|
// Emisar D3AA config options for Anduril
// Copyright (C) 2023 thefreeman, Selene ToyKeeper
// SPDX-License-Identifier: GPL-3.0-or-later
#pragma once
#define HWDEF_H hank/emisar-d3aa/hwdef.h
#include "hank/anduril.h"
// HPRsense : 4.2+0.3+20 = 24.5mR
// Vsense=42.46mV, R1= 165k
// LPRsense : 3R3
// HDR ratio: 131.5
// transition DAC level 20, ramp level 48
// fifth power ramp 0.02mA to 2001mA
#define RAMP_SIZE 150
// 4 ramp segments:
// - low 1.024V
// - low 2.5 V
// - high 1.024V
// - high 2.5 V
// HDR ratio: 131.5
// PWM1: DAC Data
// 131.5 * 1024 * 2.5 = 336640 total dimming ratio
// ./bin/dac-scale.py $( ./bin/level_calc.py 4.106 1 150 7135 3 0.01 1400 --pwm 336640 | grep PWM1 | cut -d : -f 2- )
// top level for each "gear": 30 40 119 150
#define PWM1_LEVELS \
3, 5, 6, 9, 12, 16, 21, 28, 35, 44, 55, 68, 83, 101, 121, 144, 170, 200, 234, 271, 313, 360, 412, 470, 534, 603, 680, 764, 855, 954, \
434, 482, 534, 590, 650, 715, 784, 858, 938,1023, \
20, 21, 23, 25, 27, 30, 32, 35, 37, 40, 43, 46, 49, 53, 56, 60, 64, 68, 73, 77, 82, 87, 93, 98, 104, 110, 116, 123, 129, 137, 144, 152, 160, 168, 177, 185, 195, 204, 214, 225, 235, 247, 258, 270, 282, 295, 308, 322, 336, 350, 365, 381, 396, 413, 430, 447, 465, 484, 503, 522, 543, 563, 585, 607, 629, 653, 677, 701, 726, 752, 779, 806, 834, 863, 892, 923, 954, 985,1018, \
430, 444, 459, 473, 488, 504, 520, 536, 552, 569, 587, 604, 622, 641, 660, 679, 699, 719, 740, 761, 782, 804, 827, 849, 873, 897, 921, 946, 971, 997,1023
#define PWM2_LEVELS \
V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, \
V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, \
V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, \
V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25
#define MAX_1x7135 40
#define HDR_ENABLE_LEVEL_MIN 41
#define DEFAULT_LEVEL 50
// no PWM, so MCU clock speed can be slow
#define HALFSPEED_LEVEL 41
#define QUARTERSPEED_LEVEL 40 // seems to run fine at 10kHz/4, try reducing more?
// should be about 300 mA or ~100 lm,
// to avoid overloading firmware flashing adapters
#define WEAK_BATTERY_TEST_MAX_LEVEL 75
#define RAMP_SMOOTH_FLOOR 1
#define RAMP_SMOOTH_CEIL 130 // 50% power
// 10 30 [50] 70 90 110 130
#define RAMP_DISCRETE_FLOOR 10
#define RAMP_DISCRETE_CEIL 130
#define RAMP_DISCRETE_STEPS 7
// 10 [40] 70 100 130
#define SIMPLE_UI_FLOOR 10
#define SIMPLE_UI_CEIL 130
#define SIMPLE_UI_STEPS 5
// don't blink mid-ramp
#ifdef BLINK_AT_RAMP_MIDDLE
#undef BLINK_AT_RAMP_MIDDLE
#endif
// thermal config
// temperature limit
#define THERM_FASTER_LEVEL 130 // stop panicking at 50%/1A
#define MIN_THERM_STEPDOWN MAX_1x7135
// UI
// Allow 3C in Simple UI for switching between smooth and stepped ramping
#define USE_SIMPLE_UI_RAMPING_TOGGLE
#define DEFAULT_2C_STYLE 1 // enable 2 click turbo
// AUX
#define USE_BUTTON_LED
// this light has three aux LED channels: R, G, B
#define USE_AUX_RGB_LEDS
// show each channel while it scroll by in the menu
#define USE_CONFIG_COLORS
// blink numbers on the main LEDs by default (but allow user to change it)
#define DEFAULT_BLINK_CHANNEL CM_MAIN
// use aux red + aux blue for police strobe
#define USE_POLICE_COLOR_STROBE_MODE
#define POLICE_STROBE_USES_AUX
#define POLICE_COLOR_STROBE_CH1 CM_AUXRED
#define POLICE_COLOR_STROBE_CH2 CM_AUXBLU
// the aux LEDs are front-facing, so turn them off while main LEDs are on
#ifdef USE_INDICATOR_LED_WHILE_RAMPING
#undef USE_INDICATOR_LED_WHILE_RAMPING
#endif
// Misc
#define PARTY_STROBE_ONTIME 1 // slow down party strobe
#define STROBE_OFF_LEVEL 1 // keep the regulator chip on between pulses
// smoother candle mode with bigger oscillations
#define CANDLE_AMPLITUDE 33
// added for convenience
#define USE_SOFT_FACTORY_RESET
|
