1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
|
// Emisar D3aa config options for Anduril
// Copyright (C) 2023 thefreeman, Selene ToyKeeper
// SPDX-License-Identifier: GPL-3.0-or-later
#pragma once
#define HWDEF_H hank/emisar-d3aa/hwdef.h
// HPRsense : 4.2+0.3+20 = 24.5mR
// Vsense=42.46mV, R1= 165k
// LPRsense : 3R3
// HDR ratio: 131.5
// transition DAC level 20, ramp level 48
// fifth power ramp 0.02mA to 2001mA
#define RAMP_SIZE 150
// 4 ramp segments:
// - low 1.024V
// - low 2.5 V
// - high 1.024V
// - high 2.5 V
// HDR ratio: 131.5
// PWM1: DAC Data
// (level_calc.py 4.3287 1 150 7135 5 0.01 1400 --pwm 400000)
// (top level for each "gear": 30 40 120 150)
#define PWM1_LEVELS \
3,4,5,7,9,12,15,19,24,29,35,43,51,61,72,84,99,115,133,153,176,202,230,262,297,335,377,424,475,531,592,658,730,809,894,986, \
444,488,535,586,641,700,763,830,903,980,1023, \
20,22,24,26,28,30,32,35,37,40,43,46,49,52,56,60,63,68,72,77,81,86,92,97,103,109,115,122,129,136,143,151,159,168,177,186,196,206,216,227,239,250,263,275,289,302,316,331,346,362,379,396,413,432,450,470,490,511,532,555,578,602,626,651,678,705,733,761,791,821,853,885,919,953,989, \
420,435,451,467,484,501,519,537,556,575,595,615,636,657,679,702,725,749,773,798,824,850,877,905,933,962,992,1023
#define PWM2_LEVELS \
V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10, \
V25,V25,V25,V25,V25,V25,V25,V25,V25,V25,V25, \
V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10,V10, \
V25,V25,V25,V25,V25,V25,V25,V25,V25,V25,V25,V25,V25,V25,V25,V25,V25,V25,V25,V25,V25,V25,V25,V25,V25,V25,V25,V25
#define MAX_1x7135 47
#define HDR_ENABLE_LEVEL_MIN 48
#define DEFAULT_LEVEL 50
// no PWM, so MCU clock speed can be slow
#define HALFSPEED_LEVEL 41
#define QUARTERSPEED_LEVEL 40 // seems to run fine at 10kHz/4, try reducing more
#define RAMP_SMOOTH_FLOOR 1
#define RAMP_SMOOTH_CEIL 119 // 35% / 0.7A / 700 lm
// 1 22 [44] 65 87 108 130
#define RAMP_DISCRETE_FLOOR 1
#define RAMP_DISCRETE_CEIL 119
#define RAMP_DISCRETE_STEPS 7
// 20 [45] 70 95 120
#define SIMPLE_UI_FLOOR 20
#define SIMPLE_UI_CEIL 129 // 50% / ~1A / ~860 lm
#define SIMPLE_UI_STEPS 5
// don't blink mid-ramp
#ifdef BLINK_AT_RAMP_MIDDLE
#undef BLINK_AT_RAMP_MIDDLE
#endif
// thermal config
// temperature limit
#define THERM_FASTER_LEVEL 129 // stop panicking at 50%/1A
#define MIN_THERM_STEPDOWN MAX_1x7135
// UI
#define SIMPLE_UI_ACTIVE 0 // advanced UI by default, because prototype
// allow Aux Config and Strobe Modes in Simple UI
//#define USE_EXTENDED_SIMPLE_UI
// Allow 3C in Simple UI for switching between smooth and stepped ramping
#define USE_SIMPLE_UI_RAMPING_TOGGLE
#define DEFAULT_2C_STYLE 1 // enable 2 click turbo
// AUX
#define USE_BUTTON_LED
// this light has three aux LED channels: R, G, B
#define USE_AUX_RGB_LEDS
// show each channel while it scroll by in the menu
#define USE_CONFIG_COLORS
// blink numbers on the main LEDs by default
#define DEFAULT_BLINK_CHANNEL CM_MAIN
// use aux red + aux blue for police strobe
#define USE_POLICE_COLOR_STROBE_MODE
#define POLICE_STROBE_USES_AUX
#define POLICE_COLOR_STROBE_CH1 CM_AUXRED
#define POLICE_COLOR_STROBE_CH2 CM_AUXBLU
// the aux LEDs are front-facing, so turn them off while main LEDs are on
#ifdef USE_INDICATOR_LED_WHILE_RAMPING
#undef USE_INDICATOR_LED_WHILE_RAMPING
#endif
// Misc
#define PARTY_STROBE_ONTIME 1 // slow down party strobe
#define STROBE_OFF_LEVEL 1 // keep the regulator chip on between pulses
// smoother candle mode with bigger oscillations
#define CANDLE_AMPLITUDE 40
// enable 13H factory reset so it can be used on tail e-switch lights
#define USE_SOFT_FACTORY_RESET
// TODO: disable lowpass while asleep; the MCU oversamples
|
