blob: 07c4f4b3e85fb6fc895cfa5f80f43c52e25c4a8d (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
|
// Noctigon KR4 boost driver layout (attiny1634)
// Copyright (C) 2020-2023 Selene ToyKeeper
// SPDX-License-Identifier: GPL-3.0-or-later
#pragma once
/*
* (based on Noctigon DM11-boost and KR4)
* (is basically the same except the switch is on a different pin)
*
* Pin / Name / Function
* 1 PA6 (none) (PWM1B) (reserved for DD drivers)
* 2 PA5 R: red aux LED (PWM0B)
* 3 PA4 G: green aux LED
* 4 PA3 B: blue aux LED
* 5 PA2 L: button LED
* 6 PA1 (none)
* 7 PA0 (none)
* 8 GND GND
* 9 VCC VCC
* 10 PC5 (none)
* 11 PC4 (none)
* 12 PC3 RESET
* 13 PC2 (none)
* 14 PC1 SCK
* 15 PC0 boost PMIC enable (PWM0A not used)
* 16 PB3 main LED PWM (PWM1A)
* 17 PB2 MISO / e-switch (PCINT10)
* 18 PB1 MOSI / battery voltage (ADC6)
* 19 PB0 Opamp power
* 20 PA7 (none) (PCINT7)
* ADC12 thermal sensor
*
* Main LED power uses one pin to turn the Opamp on/off,
* and one pin to control Opamp power level.
* Linear brightness control uses the power level pin, with dynamic PWM.
* The on/off pin is only used to turn the main LED on and off,
* not to change brightness.
*/
#include "hwdef-noctigon-dm11-boost.h"
// e-switch is on a different pin
#undef SWITCH_PIN
#undef SWITCH_PCINT
#undef SWITCH_PCIE
#undef SWITCH_PCMSK
#undef SWITCH_PORT
#undef SWITCH_PUE
#undef PCINT_vect
#define SWITCH_PIN PB2 // pin 17
#define SWITCH_PCINT PCINT10 // pin 17 pin change interrupt
#define SWITCH_PCIE PCIE1 // PCIE1 is for PCINT[11:8]
#define SWITCH_PCMSK PCMSK1 // PCMSK1 is for PCINT[11:8]
#define SWITCH_PORT PINB // PINA or PINB or PINC
#define SWITCH_PUE PUEB // pullup group B
#define PCINT_vect PCINT1_vect // ISR for PCINT[11:8]
|
