1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
|
// thefreeman's avr32dd20 devkit board
// Copyright (C) 2023 thefreeman, Selene ToyKeeper
// SPDX-License-Identifier: GPL-3.0-or-later
#pragma once
#define HWDEF_H thefreeman/avr32dd20-devkit/hwdef.h
// HPRsense : 1.7+0.3+5 = 7mR (DMN22M5UFG+trace resistance+5mR)
// Vsense=42.46mV, R1= 191k
// LPRsense : 1R
// transition DAC level 8, ramp level 45
// fifth power ramp 0.1mA to 6066mA
#define RAMP_SIZE 150
// 4 ramp segments:
// - low 1.024V
// - low 2.5 V
// - high 1.024V
// - high 2.5 V
// HDR ratio: 160
// PWM1: DAC Data
// level_calc.py 4.3287 1 150 7135 5 0.01 1400 --pwm 400000
// top level for each "gear": 30 40 120 150
#define PWM1_LEVELS \
6, 7, 9, 11, 14, 18, 23, 30, 37, 46, 56, 69, 83, 100, 120, 142, 168, 196, 229, 266, 307, 353, 403, 460, 522, 591, 667, 750, 840, 939, \
428, 476, 528, 584, 645, 710, 780, 856, 937,1023, \
17, 18, 20, 21, 23, 25, 27, 29, 32, 34, 37, 40, 42, 46, 49, 52, 56, 60, 64, 68, 72, 77, 81, 86, 92, 97, 103, 109, 115, 122, 128, 136, 143, 151, 159, 167, 176, 185, 194, 204, 214, 224, 235, 246, 258, 270, 283, 295, 309, 323, 337, 352, 367, 383, 399, 416, 434, 452, 470, 489, 509, 529, 550, 572, 594, 617, 640, 664, 689, 715, 741, 768, 796, 824, 854, 884, 915, 947, 979,1013, \
429, 443, 458, 473, 489, 505, 521, 538, 555, 572, 590, 609, 628, 647, 667, 687, 708, 729, 751, 773, 796, 819, 843, 867, 891, 917, 943, 969, 996,1023
#define PWM2_LEVELS \
V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, \
V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, \
V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, \
V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25
#define MAX_1x7135 40
#define HDR_ENABLE_LEVEL_MIN 41
#define DEFAULT_LEVEL 50
// no PWM, so MCU clock speed can be slow
#define HALFSPEED_LEVEL 41
#define QUARTERSPEED_LEVEL 40 // seems to run fine at 10kHz/4, try reducing more
#define RAMP_SMOOTH_FLOOR 1
#define RAMP_SMOOTH_CEIL 130 // 50% / 3A / 1000 lm
// 1 22 [44] 65 87 108 130
#define RAMP_DISCRETE_FLOOR 1
#define RAMP_DISCRETE_CEIL 130
#define RAMP_DISCRETE_STEPS 7
// 20 [45] 70 95 120
#define SIMPLE_UI_FLOOR 20
#define SIMPLE_UI_CEIL 120 // ~2.25A / ~750 lm
#define SIMPLE_UI_STEPS 5
// don't blink mid-ramp
#ifdef BLINK_AT_RAMP_MIDDLE
#undef BLINK_AT_RAMP_MIDDLE
#endif
// thermal config
// temperature limit
#define THERM_FASTER_LEVEL 130 // stop panicking at 50%/3A
#define MIN_THERM_STEPDOWN MAX_1x7135
// UI
#define SIMPLE_UI_ACTIVE 0 // advanced UI by default, because it's a dev board
// allow Aux Config and Strobe Modes in Simple UI
//#define USE_EXTENDED_SIMPLE_UI
// Allow 3C in Simple UI for switching between smooth and stepped ramping
#define USE_SIMPLE_UI_RAMPING_TOGGLE
#define DEFAULT_2C_STYLE 1 // enable 2 click turbo
// AUX
//#define USE_BUTTON_LED
// this light has three aux LED channels: R, G, B
#define USE_AUX_RGB_LEDS
// turn on the aux LEDs while main LEDs are on
// because this is a dev board and it's useful to see that
#define USE_AUX_RGB_LEDS_WHILE_ON 20
#define USE_INDICATOR_LED_WHILE_RAMPING
// show each channel while it scroll by in the menu
#define USE_CONFIG_COLORS
// blink numbers on the main LEDs by default
#define DEFAULT_BLINK_CHANNEL CM_MAIN
// use aux red + aux blue for police strobe
#define USE_POLICE_COLOR_STROBE_MODE
#define POLICE_STROBE_USES_AUX
#define POLICE_COLOR_STROBE_CH1 CM_AUXRED
#define POLICE_COLOR_STROBE_CH2 CM_AUXBLU
// the aux LEDs are front-facing, so turn them off while main LEDs are on
#ifdef USE_INDICATOR_LED_WHILE_RAMPING
#undef USE_INDICATOR_LED_WHILE_RAMPING
#endif
// Misc
#define PARTY_STROBE_ONTIME 1 // slow down party strobe
#define STROBE_OFF_LEVEL 1 // keep the regulator chip on between pulses
// smoother candle mode with bigger oscillations
#define CANDLE_AMPLITUDE 40
// enable 13H factory reset so it can be used on tail e-switch lights
#define USE_SOFT_FACTORY_RESET
// TODO: disable lowpass while asleep; the MCU oversamples
|
