1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
|
// thefreeman's BST21 BST20-FWxA (no button LED)
// Copyright (C) 2023 TBD (thefreeman), Selene ToyKeeper
// SPDX-License-Identifier: GPL-3.0-or-later
#pragma once
#define HWDEF_H thefreeman/avr32dd20-devkit/hwdef.h
// HPRsense : 1.7+0.3+5 = 7mR (DMN22M5UFG+trace resistance+5mR)
// Vsense=42.46mV, R1= 191k
// LPRsense : 1R
// transition DAC level 8, ramp level 45
// fifth power ramp 0.1mA to 6066mA
#define RAMP_SIZE 150
// 4 ramp segments:
// - low 1.024V
// - low 2.5 V
// - high 1.024V
// - high 2.5 V
// HDR ratio: 160
// PWM1: DAC Data
#if 1
// level_calc.py 4.3287 1 150 7135 5 0.01 1400 --pwm 400000
// top level for each "gear": 30 40 120 150
#define PWM1_LEVELS \
6, 7, 9, 11, 14, 18, 23, 30, 37, 46, 56, 69, 83, 100, 120, 142, 168, 196, 229, 266, 307, 353, 403, 460, 522, 591, 667, 750, 840, 939, \
428, 476, 528, 584, 645, 710, 780, 856, 937,1023, \
17, 18, 20, 21, 23, 25, 27, 29, 32, 34, 37, 40, 42, 46, 49, 52, 56, 60, 64, 68, 72, 77, 81, 86, 92, 97, 103, 109, 115, 122, 128, 136, 143, 151, 159, 167, 176, 185, 194, 204, 214, 224, 235, 246, 258, 270, 283, 295, 309, 323, 337, 352, 367, 383, 399, 416, 434, 452, 470, 489, 509, 529, 550, 572, 594, 617, 640, 664, 689, 715, 741, 768, 796, 824, 854, 884, 915, 947, 979,1013, \
429, 443, 458, 473, 489, 505, 521, 538, 555, 572, 590, 609, 628, 647, 667, 687, 708, 729, 751, 773, 796, 819, 843, 867, 891, 917, 943, 969, 996,1023
#define PWM2_LEVELS \
V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, \
V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, \
V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, \
V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25
#define MAX_1x7135 40
#define HDR_ENABLE_LEVEL_MIN 41
#define DEFAULT_LEVEL 50
#else
// level_calc.py 9.21 1 150 7135 5 0.2 1400 --pwm 400000
// (plus dac-scale.py post-processing to get values for HDR+Vref ranges)
// top level for each "gear": 35 48 127 150
#define PWM1_LEVELS \
5, 11, 18, 25, 33, 41, 50, 60, 71, 83, 96, 110, 125, 141, 158, 177, 198, 220, 244, 269, 297, 326, 358, 392, 429, 469, 511, 556, 605, 657, 713, 772, 836, 904, 976, \
431, 465, 501, 539, 580, 624, 670, 720, 772, 828, 887, 950,1017, \
16, 17, 18, 20, 21, 23, 24, 26, 27, 29, 31, 33, 35, 37, 40, 42, 45, 48, 51, 54, 57, 60, 64, 68, 72, 76, 80, 85, 90, 95, 100, 106, 112, 118, 124, 131, 138, 145, 153, 161, 170, 179, 188, 198, 208, 219, 230, 242, 254, 266, 280, 294, 308, 323, 339, 355, 373, 391, 409, 429, 449, 470, 492, 515, 539, 564, 589, 616, 644, 673, 704, 735, 768, 802, 837, 874, 912, 952, 993, \
424, 442, 461, 480, 501, 522, 544, 566, 590, 614, 640, 666, 693, 721, 750, 780, 811, 844, 877, 912, 948, 985,1023
// Vref selector (V10, V20, V25, V40 = 1.024V, 2.048V, 2.5V, 4.096V)
#define PWM2_LEVELS \
V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, \
V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, \
V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, V10, \
V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25, V25
#define MAX_1x7135 48
#define DEFAULT_LEVEL 48
#define HDR_ENABLE_LEVEL_MIN 49 // when HDR FET turns ON
#endif
// no PWM, so MCU clock speed can be slow
#define HALFSPEED_LEVEL 41
#define QUARTERSPEED_LEVEL 40 // seems to run fine at 10kHz/4, try reducing more
#define RAMP_SMOOTH_FLOOR 1
#define RAMP_SMOOTH_CEIL 130 // 50% / 3A / 1000 lm
// 1 22 [44] 65 87 108 130
#define RAMP_DISCRETE_FLOOR 1
#define RAMP_DISCRETE_CEIL 130
#define RAMP_DISCRETE_STEPS 7
// 20 [45] 70 95 120
#define SIMPLE_UI_FLOOR 20
#define SIMPLE_UI_CEIL 120 // ~2.25A / ~750 lm
#define SIMPLE_UI_STEPS 5
// don't blink mid-ramp
#ifdef BLINK_AT_RAMP_MIDDLE
#undef BLINK_AT_RAMP_MIDDLE
#endif
// thermal config
// temperature limit
#define THERM_FASTER_LEVEL 130 // stop panicking at 50%/3A
#define MIN_THERM_STEPDOWN MAX_1x7135
// UI
#define SIMPLE_UI_ACTIVE 0 // advanced UI by default, because it's a dev board
// allow Aux Config and Strobe Modes in Simple UI
//#define USE_EXTENDED_SIMPLE_UI
// Allow 3C in Simple UI for switching between smooth and stepped ramping
#define USE_SIMPLE_UI_RAMPING_TOGGLE
#define DEFAULT_2C_STYLE 1 // enable 2 click turbo
// AUX
//#define USE_BUTTON_LED
// this light has three aux LED channels: R, G, B
#define USE_AUX_RGB_LEDS
// turn on the aux LEDs while main LEDs are on
// because this is a dev board and it's useful to see that
#define USE_AUX_RGB_LEDS_WHILE_ON 20
#define USE_INDICATOR_LED_WHILE_RAMPING
// show each channel while it scroll by in the menu
#define USE_CONFIG_COLORS
// blink numbers on the main LEDs by default
#define DEFAULT_BLINK_CHANNEL CM_MAIN
// use aux red + aux blue for police strobe
#define USE_POLICE_COLOR_STROBE_MODE
#define POLICE_STROBE_USES_AUX
#define POLICE_COLOR_STROBE_CH1 CM_AUXRED
#define POLICE_COLOR_STROBE_CH2 CM_AUXBLU
// the aux LEDs are front-facing, so turn them off while main LEDs are on
#ifdef USE_INDICATOR_LED_WHILE_RAMPING
#undef USE_INDICATOR_LED_WHILE_RAMPING
#endif
// Misc
#define PARTY_STROBE_ONTIME 1 // slow down party strobe
#define STROBE_OFF_LEVEL 1 // keep the regulator chip on between pulses
// smoother candle mode with bigger oscillations
#define CANDLE_AMPLITUDE 40
// enable 13H factory reset so it can be used on tail e-switch lights
#define USE_SOFT_FACTORY_RESET
// TODO: disable lowpass while asleep; the MCU oversamples
|
