path: root/src/peripherals/timer.spec.ts

import { CPU } from '../cpu/cpu';
import { asmProgram, TestProgramRunner } from '../utils/test-utils';
import { PinOverrideMode } from './gpio';
import { AVRTimer, timer0Config, timer1Config, timer2Config } from './timer';

// CPU registers
const R1 = 1;
const R17 = 17;
const R18 = 18;
const R19 = 19;
const R20 = 20;
const R21 = 21;
const R22 = 22;
const SREG = 95;

// Port Registers
const PORTB = 0x25;
const PORTD = 0x2b;

// Timer 0 Registers
const TIFR0 = 0x35;
const TCCR0A = 0x44;
const TCCR0B = 0x45;
const TCNT0 = 0x46;
const OCR0A = 0x47;
const OCR0B = 0x48;
const TIMSK0 = 0x6e;
const TIMSK1 = 0x6f;

// Timer 1 Registers
const TIFR1 = 0x36;
const TCCR1A = 0x80;
const TCCR1B = 0x81;
const TCNT1 = 0x84;
const TCNT1H = 0x85;
const ICR1 = 0x86;
const ICR1H = 0x87;
const OCR1A = 0x88;
const OCR1AH = 0x89;

// Timer 2 Registers
const TCCR2B = 0xb1;
const TCNT2 = 0xb2;

// Register bit names
const TOV0 = 1;
const TOV1 = 1;
const OCIE0A = 2;
const OCIE0B = 4;
const TOIE0 = 1;
const OCF0A = 2;
const OCF0B = 4;
const OCF1A = 2;
const WGM00 = 1;
const WGM01 = 2;
const WGM12 = 8;
const WGM13 = 16;
const CS00 = 1;
const CS01 = 2;
const CS10 = 1;
const CS21 = 2;
const CS22 = 4;

// opcodes
const nopOpCode = '0000';

describe('timer', () => {
  it('should update timer every tick when prescaler is 1', () => {
    const cpu = new CPU(new Uint16Array(0x1000));
    new AVRTimer(cpu, timer0Config);
    cpu.writeData(TCCR0B, CS00); // Set prescaler to 1
    cpu.cycles = 1;
    cpu.tick();
    cpu.cycles = 2;
    cpu.tick();
    const tcnt = cpu.readData(TCNT0);
    expect(tcnt).toEqual(1);
  });

  it('should update timer every 64 ticks when prescaler is 3', () => {
    const cpu = new CPU(new Uint16Array(0x1000));
    new AVRTimer(cpu, timer0Config);
    cpu.writeData(TCCR0B, CS01 | CS00); // Set prescaler to 64
    cpu.cycles = 1;
    cpu.tick();
    cpu.cycles = 1 + 64;
    cpu.tick();
    const tcnt = cpu.readData(TCNT0);
    expect(tcnt).toEqual(1);
  });

  it('should not update timer if it has been disabled', () => {
    const cpu = new CPU(new Uint16Array(0x1000));
    new AVRTimer(cpu, timer0Config);
    cpu.writeData(TCCR0B, 0); // No prescaler (timer disabled)
    cpu.cycles = 1;
    cpu.tick();
    cpu.cycles = 100000;
    cpu.tick();
    const tcnt = cpu.readData(TCNT0);
    expect(tcnt).toEqual(0); // TCNT should stay 0
  });

  it('should set the TOV flag when timer reaches the TOP value', () => {
    const cpu = new CPU(new Uint16Array(0x1000));
    new AVRTimer(cpu, timer0Config);
    cpu.writeData(TCNT0, 0xff);
    cpu.writeData(TCCR0B, CS00); // Set prescaler to 1
    cpu.cycles = 1;
    cpu.tick();
    expect(cpu.readData(TCNT0)).toEqual(0xff);
    expect(cpu.data[TIFR0] & TOV0).toEqual(TOV0);
  });

  it('should set the TOV if timer overflows past TOP without reaching TOP', () => {
    const cpu = new CPU(new Uint16Array(0x1000));
    new AVRTimer(cpu, timer0Config);
    cpu.writeData(TCNT0, 0xfe);
    cpu.writeData(TCCR0B, CS00); // Set prescaler to 1
    cpu.cycles = 1;
    cpu.tick();
    expect(cpu.readData(TCNT0)).toEqual(0xfe);
    cpu.cycles += 4;
    cpu.tick();
    expect(cpu.readData(TCNT0)).toEqual(0x2);
    expect(cpu.data[TIFR0] & TOV0).toEqual(TOV0);
  });

  it('should clear the TOV flag when writing 1 to the TOV bit, and not trigger the interrupt', () => {
    const cpu = new CPU(new Uint16Array(0x1000));
    new AVRTimer(cpu, timer0Config);
    cpu.writeData(TCNT0, 0xff);
    cpu.writeData(TCCR0B, CS00); // Set prescaler to 1
    cpu.cycles = 1;
    cpu.tick();
    cpu.cycles = 2;
    cpu.tick();
    expect(cpu.data[TIFR0] & TOV0).toEqual(TOV0);
    cpu.writeData(TIFR0, TOV0);
    expect(cpu.data[TIFR0] & TOV0).toEqual(0);
  });

  it('should set TOV if timer overflows in FAST PWM mode', () => {
    const cpu = new CPU(new Uint16Array(0x1000));
    new AVRTimer(cpu, timer0Config);
    cpu.writeData(TCNT0, 0xff);
    cpu.writeData(TCCR0B, CS00); // Set prescaler to 1
    cpu.cycles = 1;
    cpu.tick();
    cpu.writeData(OCR0A, 0x7f);
    cpu.writeData(TCCR0A, WGM01 | WGM00); // WGM: Fast PWM
    cpu.cycles = 2;
    cpu.tick();
    const tcnt = cpu.readData(TCNT0);
    expect(tcnt).toEqual(0);
    expect(cpu.data[TIFR0] & TOV0).toEqual(TOV0);
  });

  it('should generate an overflow interrupt if timer overflows and interrupts enabled', () => {
    const cpu = new CPU(new Uint16Array(0x1000));
    new AVRTimer(cpu, timer0Config);
    cpu.writeData(TCNT0, 0xff);
    cpu.writeData(TCCR0B, CS00); // Set prescaler to 1
    cpu.cycles = 1;
    cpu.tick();
    cpu.writeData(TIMSK0, TOIE0);
    cpu.data[SREG] = 0x80; // SREG: I-------
    cpu.cycles = 2;
    cpu.tick();
    const tcnt = cpu.readData(TCNT0);
    expect(tcnt).toEqual(2); // TCNT should be 2 (one tick above + 2 cycles for interrupt)
    expect(cpu.data[TIFR0] & TOV0).toEqual(0);
    expect(cpu.pc).toEqual(0x20);
    expect(cpu.cycles).toEqual(4);
  });

  it('should support overriding TIFR/TOV and TIMSK/TOIE bits (issue #64)', () => {
    const cpu = new CPU(new Uint16Array(0x1000));
    new AVRTimer(cpu, {
      ...timer0Config,

      // The following values correspond ATtiny85 config:
      TOV: 2,
      OCFA: 2,
      OCFB: 8,
      TOIE: 2,
      OCIEA: 16,
      OCIEB: 8,
    });
    cpu.writeData(TCNT0, 0xff);
    cpu.writeData(TCCR0B, CS00); // Set prescaler to 1
    cpu.cycles = 1;
    cpu.tick();
    cpu.writeData(TIMSK0, 2);
    cpu.data[SREG] = 0x80; // SREG: I-------
    cpu.cycles = 2;
    cpu.tick();
    const tcnt = cpu.readData(TCNT0);
    expect(tcnt).toEqual(2); // TCNT should be 2 (one tick above + 2 cycles for interrupt)
    expect(cpu.data[TIFR0] & 2).toEqual(0);
    expect(cpu.pc).toEqual(0x20);
    expect(cpu.cycles).toEqual(4);
  });

  it('should not generate an overflow interrupt when global interrupts disabled', () => {
    const cpu = new CPU(new Uint16Array(0x1000));
    new AVRTimer(cpu, timer0Config);
    cpu.writeData(TCNT0, 0xff);
    cpu.writeData(TCCR0B, CS00); // Set prescaler to 1
    cpu.cycles = 1;
    cpu.tick();
    cpu.data[TIMSK0] = TOIE0;
    cpu.data[SREG] = 0x0; // SREG: --------
    cpu.cycles = 2;
    cpu.tick();
    expect(cpu.data[TIFR0] & TOV0).toEqual(TOV0);
    expect(cpu.pc).toEqual(0);
    expect(cpu.cycles).toEqual(2);
  });

  it('should not generate an overflow interrupt when TOIE0 is clear', () => {
    const cpu = new CPU(new Uint16Array(0x1000));
    new AVRTimer(cpu, timer0Config);
    cpu.writeData(TCNT0, 0xff);
    cpu.writeData(TCCR0B, CS00); // Set prescaler to 1
    cpu.cycles = 1;
    cpu.tick();
    cpu.data[TIMSK0] = 0;
    cpu.data[SREG] = 0x80; // SREG: I-------
    cpu.cycles = 2;
    cpu.tick();
    expect(cpu.data[TIFR0] & TOV0).toEqual(TOV0);
    expect(cpu.pc).toEqual(0);
    expect(cpu.cycles).toEqual(2);
  });

  it('should set OCF0A/B flags when OCRA/B == 0 and the timer equals to OCRA (issue #74)', () => {
    const cpu = new CPU(new Uint16Array(0x1000));
    new AVRTimer(cpu, timer0Config);
    cpu.writeData(TCNT0, 0xff);
    cpu.writeData(OCR0A, 0x0);
    cpu.writeData(OCR0B, 0x0);
    cpu.writeData(TCCR0A, 0x0); // WGM: Normal
    cpu.writeData(TCCR0B, CS00); // Set prescaler to 1
    cpu.cycles = 1;
    cpu.tick();
    cpu.cycles = 2;
    cpu.tick();
    expect(cpu.data[TIFR0] & (OCF0A | OCF0B)).toEqual(OCF0A | OCF0B);
    expect(cpu.pc).toEqual(0);
    expect(cpu.cycles).toEqual(2);
  });

  it('should set OCF0A flag when timer equals OCRA', () => {
    const cpu = new CPU(new Uint16Array(0x1000));
    new AVRTimer(cpu, timer0Config);
    cpu.writeData(TCNT0, 0x10);
    cpu.writeData(OCR0A, 0x11);
    cpu.writeData(TCCR0A, 0x0); // WGM: Normal
    cpu.writeData(TCCR0B, CS00); // Set prescaler to 1
    cpu.cycles = 1;
    cpu.tick();
    cpu.cycles = 2;
    cpu.tick();
    expect(cpu.data[TIFR0]).toEqual(OCF0A);
    expect(cpu.pc).toEqual(0);
    expect(cpu.cycles).toEqual(2);
  });

  it('should reset the counter in CTC mode if it equals to OCRA', () => {
    const cpu = new CPU(new Uint16Array(0x1000));
    new AVRTimer(cpu, timer0Config);
    cpu.writeData(TCNT0, 0x10);
    cpu.writeData(OCR0A, 0x11);
    cpu.writeData(TCCR0A, WGM01); // WGM: CTC
    cpu.writeData(TCCR0B, CS00); // Set prescaler to 1
    cpu.cycles = 1;
    cpu.tick();
    cpu.cycles = 3;
    cpu.tick();
    const tcnt = cpu.readData(TCNT0);
    expect(tcnt).toEqual(0);
    expect(cpu.pc).toEqual(0);
    expect(cpu.cycles).toEqual(3);
  });

  it('should not set the TOV bit when TOP < MAX in CTC mode (issue #75)', () => {
    const cpu = new CPU(new Uint16Array(0x1000));
    new AVRTimer(cpu, timer0Config);
    cpu.writeData(TCNT0, 0x1e);
    cpu.writeData(OCR0A, 0x1f);
    cpu.writeData(TCCR0A, WGM01); // WGM: CTC
    cpu.writeData(TCCR0B, CS00); // Set prescaler to 1
    cpu.cycles = 1;
    cpu.tick();
    cpu.cycles = 2;
    cpu.tick();
    const tcnt = cpu.readData(TCNT0);
    expect(tcnt).toEqual(0x1f);
    expect(cpu.data[TIFR0]).toEqual(OCF0A); // TOV0 clear
  });

  it('should set the TOV bit when TOP == MAX in CTC mode (issue #75)', () => {
    const cpu = new CPU(new Uint16Array(0x1000));
    new AVRTimer(cpu, timer0Config);
    cpu.writeData(TCNT0, 0xfe);
    cpu.writeData(OCR0A, 0xff);
    cpu.writeData(TCCR0A, WGM01); // WGM: CTC
    cpu.writeData(TCCR0B, CS00); // Set prescaler to 1
    cpu.cycles = 1;
    cpu.tick();
    cpu.cycles = 2;
    cpu.tick();
    const tcnt = cpu.readData(TCNT0);
    expect(tcnt).toEqual(0xff);
    expect(cpu.data[TIFR0]).toEqual(OCF0A | TOV0);
  });

  it('should not set the TOV bit twice on overflow (issue #80)', () => {
    const cpu = new CPU(new Uint16Array(0x1000));
    new AVRTimer(cpu, timer0Config);
    cpu.writeData(TCNT0, 0xfe);
    cpu.writeData(OCR0A, 0xff);
    cpu.writeData(TCCR0A, WGM01); // WGM: CTC
    cpu.writeData(TCCR0B, CS00); // Set prescaler to 1

    cpu.cycles = 1;
    cpu.tick();

    cpu.cycles = 2;
    cpu.tick();
    expect(cpu.readData(TCNT0)).toEqual(0xff);
    expect(cpu.data[TIFR0] & TOV0).toEqual(TOV0);
    cpu.data[TIFR0] &= ~TOV0; // Clear the TOV0 bit

    cpu.cycles = 3;
    cpu.tick();
    expect(cpu.readData(TCNT0)).toEqual(0);
    expect(cpu.data[TIFR0] & TOV0).toEqual(0);
  });

  it('should set OCF0B flag when timer equals OCRB', () => {
    const cpu = new CPU(new Uint16Array(0x1000));
    new AVRTimer(cpu, timer0Config);
    cpu.writeData(TCNT0, 0x10);
    cpu.writeData(OCR0B, 0x11);
    cpu.writeData(TCCR0A, 0x0); // WGM: (Normal)
    cpu.writeData(TCCR0B, CS00); // Set prescaler to 1
    cpu.cycles = 1;
    cpu.tick();
    cpu.cycles = 2;
    cpu.tick();
    expect(cpu.data[TIFR0]).toEqual(OCF0B);
    expect(cpu.pc).toEqual(0);
    expect(cpu.cycles).toEqual(2);
  });

  it('should generate Timer Compare A interrupt when TCNT0 == TCNTA', () => {
    const cpu = new CPU(new Uint16Array(0x1000));
    new AVRTimer(cpu, timer0Config);
    cpu.writeData(TCNT0, 0x20);
    cpu.writeData(OCR0A, 0x21);
    cpu.writeData(TCCR0B, CS00); // Set prescaler to 1
    cpu.writeData(TIMSK0, OCIE0A);
    cpu.writeData(95, 0x80); // SREG: I-------
    cpu.cycles = 1;
    cpu.tick();
    cpu.cycles = 2;
    cpu.tick();
    const tcnt = cpu.readData(TCNT0);
    expect(tcnt).toEqual(0x23); // TCNT should be 0x23 (one tick above + 2 cycles for interrupt)
    expect(cpu.data[TIFR0] & OCF0A).toEqual(0);
    expect(cpu.pc).toEqual(0x1c);
    expect(cpu.cycles).toEqual(4);
  });

  it('should not generate Timer Compare A interrupt when OCIEA is disabled', () => {
    const cpu = new CPU(new Uint16Array(0x1000));
    new AVRTimer(cpu, timer0Config);
    cpu.writeData(TCNT0, 0x20);
    cpu.writeData(OCR0A, 0x21);
    cpu.writeData(TCCR0B, CS00); // Set prescaler to 1
    cpu.writeData(TIMSK0, 0);
    cpu.writeData(95, 0x80); // SREG: I-------
    cpu.cycles = 1;
    cpu.tick();
    cpu.cycles = 2;
    cpu.tick();
    const tcnt = cpu.readData(TCNT0);
    expect(tcnt).toEqual(0x21);
    expect(cpu.pc).toEqual(0);
    expect(cpu.cycles).toEqual(2);
  });

  it('should generate Timer Compare B interrupt when TCNT0 == TCNTB', () => {
    const cpu = new CPU(new Uint16Array(0x1000));
    new AVRTimer(cpu, timer0Config);
    cpu.writeData(TCNT0, 0x20);
    cpu.writeData(OCR0B, 0x21);
    cpu.writeData(TCCR0B, CS00); // Set prescaler to 1
    cpu.writeData(TIMSK0, OCIE0B);
    cpu.writeData(95, 0x80); // SREG: I-------
    cpu.cycles = 1;
    cpu.tick();
    cpu.cycles = 2;
    cpu.tick();
    const tcnt = cpu.readData(TCNT0);
    expect(tcnt).toEqual(0x23); // TCNT should be 0x23 (0x23 + 2 cycles for interrupt)
    expect(cpu.data[TIFR0] & OCF0B).toEqual(0);
    expect(cpu.pc).toEqual(0x1e);
    expect(cpu.cycles).toEqual(4);
  });

  it('should not increment TCNT on the same cycle of TCNT write (issue #36)', () => {
    // At the end of this short program, R17 should contain 0x31. Verified against
    // a physical ATmega328p.
    const { program, instructionCount } = asmProgram(`
      LDI r16, 0x1    ; TCCR0B = 1 << CS00;
      OUT 0x25, r16
      LDI r16, 0x30   ; TCNT <- 0x30
      OUT 0x26, r16
      NOP
      IN r17, 0x26    ; r17 <- TCNT
    `);
    const cpu = new CPU(program);
    new AVRTimer(cpu, timer0Config);
    const runner = new TestProgramRunner(cpu);
    runner.runInstructions(instructionCount);
    expect(cpu.data[R17]).toEqual(0x31);
  });

  it('timer2 should count every 256 ticks when prescaler is 6 (issue #5)', () => {
    const cpu = new CPU(new Uint16Array(0x1000));
    new AVRTimer(cpu, timer2Config);
    cpu.writeData(TCCR2B, CS22 | CS21); // Set prescaler to 256
    cpu.cycles = 1;
    cpu.tick();

    cpu.cycles = 1 + 511;
    cpu.tick();
    expect(cpu.readData(TCNT2)).toEqual(1);

    cpu.cycles = 1 + 512;
    cpu.tick();
    expect(cpu.readData(TCNT2)).toEqual(2);
  });

  it('should update TCNT as it is being read by a 2-cycle instruction (issue #40)', () => {
    const { program, instructionCount } = asmProgram(`
      LDI r16, 0x1      ; TCCR0B = 1 << CS00
      OUT 0x25, r16
      LDI r16, 0x0      ; TCNT0 <- 0
      OUT 0x26, r16
      NOP
      LDS r1, 0x46      ; r1 <- TCNT0 (2 cycles)
    `);
    const cpu = new CPU(program);
    new AVRTimer(cpu, timer0Config);
    const runner = new TestProgramRunner(cpu);
    runner.runInstructions(instructionCount);
    expect(cpu.data[R1]).toEqual(2);
  });

  it('should not start counting before the prescaler is first set (issue #41)', () => {
    const { program, instructionCount } = asmProgram(`
      NOP
      NOP
      NOP
      NOP
      LDI r16, 0x1    ; TCCR2B = 1 << CS20;
      STS 0xb1, r16   ; Should start counting after this line
      NOP
      LDS r17, 0xb2   ; TCNT should equal 2 at this point
    `);
    const cpu = new CPU(program);
    new AVRTimer(cpu, timer2Config);
    const runner = new TestProgramRunner(cpu);
    runner.runInstructions(instructionCount);
    expect(cpu.readData(R17)).toEqual(2);
  });

  it('should not keep counting for one more instruction when the timer is disabled (issue #72)', () => {
    const { program, instructionCount } = asmProgram(`
      EOR r1, r1      ; r1 = 0;
      LDI r16, 0x1    ; TCCR2B = 1 << CS20;
      STS 0xb1, r16   ; Should start counting after this instruction,
      STS 0xb1, r1    ; and stop counting *after* this one.
      NOP
      LDS r17, 0xb2   ; TCNT2 should equal 2 at this point (not counting the NOP)
  `);
    const cpu = new CPU(program);
    new AVRTimer(cpu, timer2Config);
    const runner = new TestProgramRunner(cpu);
    runner.runInstructions(instructionCount);
    expect(cpu.readData(R17)).toEqual(2);
  });

  describe('Phase-correct PWM mode', () => {
    it('should count up to TOP, down to 0, and then set TOV flag', () => {
      const { program, instructionCount } = asmProgram(`
        LDI r16, 0x3   ; OCR0A = 0x3;   // <- TOP value
        OUT 0x27, r16  
        ; Set waveform generation mode (WGM) to PWM, Phase Correct, top OCR0A
        LDI r16, 0x1   ; TCCR0A = 1 << WGM00;
        OUT 0x24, r16  
        LDI r16, 0x9   ; TCCR0B = (1 << WGM02) | (1 << CS00);
        OUT 0x25, r16  
        LDI r16, 0x2   ; TCNT0 = 0x2;
        OUT 0x26, r16

        IN r17, 0x26   ; TCNT0 will be 2
        IN r18, 0x26   ; TCNT0 will be 3
        IN r19, 0x26   ; TCNT0 will be 2
        IN r20, 0x26   ; TCNT0 will be 1
        IN r21, 0x26   ; TCNT0 will be 0
        IN r22, 0x26   ; TCNT0 will be 1 (end of test)
      `);
      const cpu = new CPU(program);
      new AVRTimer(cpu, timer0Config);
      const runner = new TestProgramRunner(cpu);
      runner.runInstructions(instructionCount);

      expect(cpu.readData(R17)).toEqual(2);
      expect(cpu.readData(R18)).toEqual(3);
      expect(cpu.readData(R19)).toEqual(2);
      expect(cpu.readData(R20)).toEqual(1);
      expect(cpu.readData(R21)).toEqual(0);
      expect(cpu.readData(R22)).toEqual(1);
      expect(cpu.data[TIFR0] & TOV0).toEqual(TOV0);
    });

    it('should clear OC0A when TCNT0=OCR0A and counting up', () => {
      const { program, lines, instructionCount } = asmProgram(`
        LDI r16, 0xfe   ; OCR0A = 0xfe;   // <- TOP value
        OUT 0x27, r16  
        ; Set waveform generation mode (WGM) to PWM, Phase Correct
        LDI r16, 0x81   ; TCCR0A = (1 << COM0A1) | (1 << WGM00);
        OUT 0x24, r16  
        LDI r16, 0x1   ; TCCR0B = (1 << CS00);
        OUT 0x25, r16  
        LDI r16, 0xfd   ; TCNT0 = 0xfd;
        OUT 0x26, r16  

        NOP   ; TCNT0 will be 0xfe
        NOP   ; TCNT0 will be 0xff
        NOP   ; TCNT0 will be 0xfe again (end of test)
      `);

      const cpu = new CPU(program);
      new AVRTimer(cpu, timer0Config);

      // Listen to Port D's internal callback
      const gpioCallback = jest.fn();
      cpu.gpioTimerHooks[PORTD] = gpioCallback;

      const nopCount = lines.filter((line) => line.bytes == nopOpCode).length;
      const runner = new TestProgramRunner(cpu);
      runner.runInstructions(instructionCount - nopCount);

      expect(cpu.readData(TCNT0)).toEqual(0xfd);
      expect(gpioCallback).toHaveBeenCalledWith(6, PinOverrideMode.Enable, 0x2b);
      gpioCallback.mockClear();

      runner.runInstructions(1);
      expect(cpu.readData(TCNT0)).toEqual(0xfe);
      expect(gpioCallback).toHaveBeenCalledWith(6, PinOverrideMode.Clear, 0x2b);
      gpioCallback.mockClear();

      runner.runInstructions(1);
      expect(cpu.readData(TCNT0)).toEqual(0xff);
      expect(gpioCallback).not.toHaveBeenCalled();

      runner.runInstructions(1);
      expect(cpu.readData(TCNT0)).toEqual(0xfe);
      expect(gpioCallback).toHaveBeenCalledWith(6, PinOverrideMode.Set, 0x2b);
    });

    it('should not miss Compare Match when executing multi-cycle instruction (issue #79)', () => {
      const { program, instructionCount } = asmProgram(`
        LDI r16, 0x10   ; OCR0A = 0x10;   // <- TOP value
        OUT 0x27, r16  
        ; Set waveform generation mode (WGM) to normal, enable OC0A (Set on match)
        LDI r16, 0xc0   ; TCCR0A = (1 << COM0A1) | (1 << COM0A0);
        OUT 0x24, r16  
        LDI r16, 0x1    ; TCCR0B = (1 << CS00);
        OUT 0x25, r16  
        LDI r16, 0xf    ; TCNT0 = 0xf;
        OUT 0x26, r16  
        RJMP 1          ; TCNT0 will be 0x11 (RJMP takes 2 cycles)
      `);

      const cpu = new CPU(program);
      new AVRTimer(cpu, timer0Config);

      // Listen to Port D's internal callback
      const gpioCallback = jest.fn();
      cpu.gpioTimerHooks[PORTD] = gpioCallback;

      const runner = new TestProgramRunner(cpu);
      runner.runInstructions(instructionCount);

      expect(cpu.readData(TCNT0)).toEqual(0x11);
      expect(gpioCallback).toHaveBeenCalledWith(6, PinOverrideMode.Enable, 0x2b);

      // Verify that Compare Match has occured and set the OC0A pin (PD6 on ATmega328p)
      expect(gpioCallback).toHaveBeenCalledWith(6, PinOverrideMode.Set, 0x2b);
    });

    it('should only update OCR0A when TCNT0=TOP in PWM Phase Correct mode (issue #76)', () => {
      const { program, instructionCount } = asmProgram(`
        LDI r16, 0x4   ; OCR0A = 0x4;
        OUT 0x27, r16  
        ; Set waveform generation mode (WGM) to PWM, Phase Correct
        LDI r16, 0x01   ; TCCR0A = (1 << WGM00);
        OUT 0x24, r16  
        LDI r16, 0x09   ; TCCR0B = (1 << WGM02) | (1 << CS00);
        OUT 0x25, r16  
        LDI r16, 0x0   ; TCNT0 = 0x0;
        OUT 0x26, r16  

        LDI r16, 0x2    ; OCR0A = 0x2; // TCNT0 should read 0x0
        OUT 0x27, r16   ; // TCNT0 should read 0x1
        NOP             ; // TCNT0 should read 0x2
        NOP             ; // TCNT0 should read 0x3
        IN r17, 0x26    ; R17 = TCNT;  // TCNT0 should read 0x4 (that's old OCR0A / TOP)
        NOP             ; // TCNT0 should read 0x3
        NOP             ; // TCNT0 should read 0x2
        NOP             ; // TCNT0 should read 0x1
        NOP             ; // TCNT0 should read 0x0
        NOP             ; // TCNT0 should read 0x1
        NOP             ; // TCNT0 should read 0x2
        IN r18, 0x26    ; R18 = TCNT; // TCNT0 should read 0x1
      `);

      const cpu = new CPU(program);
      new AVRTimer(cpu, timer0Config);

      // Listen to Port D's internal callback
      const gpioCallback = jest.fn();
      cpu.gpioTimerHooks[PORTD] = gpioCallback;

      const runner = new TestProgramRunner(cpu);
      runner.runInstructions(instructionCount);

      expect(cpu.readData(R17)).toEqual(0x4);
      expect(cpu.readData(R18)).toEqual(0x1);
    });
  });

  describe('16 bit timers', () => {
    it('should increment 16-bit TCNT by 1', () => {
      const cpu = new CPU(new Uint16Array(0x1000));
      new AVRTimer(cpu, timer1Config);
      cpu.writeData(TCNT1H, 0x22); // TCNT1 <- 0x2233
      cpu.writeData(TCNT1, 0x33); // ...
      const timerLow = cpu.readData(TCNT1);
      const timerHigh = cpu.readData(TCNT1H);
      expect((timerHigh << 8) | timerLow).toEqual(0x2233);
      cpu.writeData(TCCR1A, 0x0); // WGM: Normal
      cpu.writeData(TCCR1B, CS10); // Set prescaler to 1
      cpu.cycles = 1;
      cpu.tick();
      cpu.cycles = 2;
      cpu.tick();
      cpu.readData(TCNT1);
      expect(cpu.dataView.getUint16(TCNT1, true)).toEqual(0x2234); // TCNT1 should increment
    });

    it('should set OCF0A flag when timer equals OCRA (16 bit mode)', () => {
      const cpu = new CPU(new Uint16Array(0x1000));
      new AVRTimer(cpu, timer1Config);
      cpu.writeData(TCNT1H, 0x10); // TCNT1 <- 0x10ee
      cpu.writeData(TCNT1, 0xee); // ...
      cpu.writeData(OCR1AH, 0x10); // OCR1 <- 0x10ef
      cpu.writeData(OCR1A, 0xef); // ...
      cpu.writeData(TCCR1A, 0x0); // WGM: Normal
      cpu.writeData(TCCR1B, CS10); // Set prescaler to 1
      cpu.cycles = 1;
      cpu.tick();
      cpu.cycles = 2;
      cpu.tick();
      expect(cpu.data[TIFR1]).toEqual(OCF1A); // TIFR1 should have OCF1A bit on
      expect(cpu.pc).toEqual(0);
      expect(cpu.cycles).toEqual(2);
    });

    it('should generate an overflow interrupt if timer overflows and interrupts enabled', () => {
      const cpu = new CPU(new Uint16Array(0x1000));
      new AVRTimer(cpu, timer1Config);
      cpu.writeData(TCCR1A, 0x3); // TCCR1A <- WGM10 | WGM11 (Fast PWM, 10-bit)
      cpu.writeData(TCCR1B, 0x9); // TCCR1B <- WGM12 | CS10
      cpu.writeData(TIMSK1, 0x1); // TIMSK1: TOIE1
      cpu.data[SREG] = 0x80; // SREG: I-------
      cpu.writeData(TCNT1H, 0x3); // TCNT1 <- 0x3ff
      cpu.cycles = 1;
      cpu.tick();
      cpu.writeData(TCNT1, 0xff); // ...
      cpu.cycles++; // This cycle shouldn't be counted
      cpu.tick();
      cpu.cycles++;
      cpu.tick(); // This is where we cause the overflow
      cpu.readData(TCNT1); // Refresh TCNT1
      expect(cpu.dataView.getUint16(TCNT1, true)).toEqual(2);
      expect(cpu.data[TIFR1] & TOV1).toEqual(0);
      expect(cpu.pc).toEqual(0x1a);
      expect(cpu.cycles).toEqual(5);
    });

    it('should reset the timer once it reaches ICR value in mode 12', () => {
      const cpu = new CPU(new Uint16Array(0x1000));
      new AVRTimer(cpu, timer1Config);
      cpu.writeData(TCNT1H, 0x50); // TCNT1 <- 0x500f
      cpu.writeData(TCNT1, 0x0f); // ...
      cpu.writeData(ICR1H, 0x50); // ICR1 <- 0x5010
      cpu.writeData(ICR1, 0x10); // ...
      cpu.writeData(TCCR1B, WGM13 | WGM12 | CS10); // Set prescaler to 1, WGM: CTC
      cpu.cycles = 1;
      cpu.tick();
      cpu.cycles = 3; // 2 cycles should increment timer twice, beyond ICR1
      cpu.tick();
      cpu.readData(TCNT1); // Refresh TCNT1
      expect(cpu.dataView.getUint16(TCNT1, true)).toEqual(0); // TCNT should be 0
      expect(cpu.data[TIFR1] & TOV1).toEqual(0);
      expect(cpu.cycles).toEqual(3);
    });

    it('should not update the high byte of TCNT if written after the low byte (issue #37)', () => {
      const cpu = new CPU(new Uint16Array(0x1000));
      new AVRTimer(cpu, timer1Config);
      cpu.writeData(TCNT1, 0x22);
      cpu.writeData(TCNT1H, 0x55);
      cpu.cycles = 1;
      cpu.tick();
      const timerLow = cpu.readData(TCNT1);
      const timerHigh = cpu.readData(TCNT1H);
      expect((timerHigh << 8) | timerLow).toEqual(0x22);
    });

    it('reading from TCNT1H before TCNT1L should return old value (issue #37)', () => {
      const cpu = new CPU(new Uint16Array(0x1000));
      new AVRTimer(cpu, timer1Config);
      cpu.writeData(TCNT1H, 0xff);
      cpu.writeData(TCNT1, 0xff);
      cpu.writeData(TCCR1B, WGM12 | CS10); // Set prescaler to 1, WGM: CTC
      cpu.cycles = 1;
      cpu.tick();
      cpu.cycles = 2;
      cpu.tick();
      // We read the high byte before the low byte, so the high byte should still have
      // the previous value:
      const timerHigh = cpu.readData(TCNT1H);
      const timerLow = cpu.readData(TCNT1);
      expect((timerHigh << 8) | timerLow).toEqual(0xff00);
    });

    it('should toggle OC1B on Compare Match', () => {
      const { program, lines, instructionCount } = asmProgram(`
        ; Set waveform generation mode (WGM) to Normal, top 0xFFFF
        LDI r16, 0x10   ; TCCR1A = (1 << COM1B0);
        STS 0x80, r16  
        LDI r16, 0x1    ; TCCR1B = (1 << CS00);
        STS 0x81, r16  
        LDI r16, 0x0    ; OCR1BH = 0x0;
        STS 0x8B, r16  
        LDI r16, 0x4a   ; OCR1BL = 0x4a;
        STS 0x8A, r16  
        LDI r16, 0x0    ; TCNT1H = 0x0;
        STS 0x85, r16  
        LDI r16, 0x49   ; TCNT1L = 0x49;
        STS 0x84, r16  

        NOP   ; TCNT1 will be 0x49
        NOP   ; TCNT1 will be 0x4a
      `);

      const cpu = new CPU(program);
      new AVRTimer(cpu, timer1Config);

      // Listen to Port B's internal callback
      const gpioCallback = jest.fn();
      cpu.gpioTimerHooks[PORTB] = gpioCallback;

      const nopCount = lines.filter((line) => line.bytes == nopOpCode).length;
      const runner = new TestProgramRunner(cpu);
      runner.runInstructions(instructionCount - nopCount);

      expect(cpu.readData(TCNT1)).toEqual(0x49);
      expect(gpioCallback).toHaveBeenCalledWith(2, PinOverrideMode.Enable, 0x25);
      gpioCallback.mockClear();

      runner.runInstructions(1);
      expect(cpu.readData(TCNT1)).toEqual(0x4a);
      expect(gpioCallback).toHaveBeenCalledWith(2, PinOverrideMode.Toggle, 0x25);
    });

    it('should only update OCR0A when TCNT0=BOTTOM in PWM Phase/Frequency Correct mode (issue #76)', () => {
      const { program, instructionCount } = asmProgram(`
        LDI r16, 0x0    ; OCR1AH = 0x0;
        STS 0x89, r16  
        LDI r16, 0x4   ; OCR1AL = 0x4;
        STS 0x88, r16  
        ; Set waveform generation mode (WGM) to PWM Phase/Frequency Correct mode (9)
        LDI r16, 0x01   ; TCCR1A = (1 << WGM10);
        STS 0x80, r16  
        LDI r16, 0x11   ; TCCR1B = (1 << WGM13) | (1 << CS00);
        STS 0x81, r16  
        LDI r16, 0x0    ; TCNT1H = 0x0;
        STS 0x85, r16  
        LDI r16, 0x0    ; TCNT1L = 0x0;
        STS 0x84, r16  

        LDI r16, 0x8   ; OCR1AL = 0x8; // TCNT1 should read 0x0
        STS 0x88, r16  ; // TCNT1 should read 0x2 (going up)
        LDS r17, 0x84  ; // TCNT1 should read 0x4 (going down)
        LDS r18, 0x84  ; // TCNT1 should read 0x2 (going down)
        NOP            ; // TCNT1 should read 0x0 (going up)
        NOP            ; // TCNT1 should read 0x1 (going up)
        NOP            ; // TCNT1 should read 0x2 (going up)
        NOP            ; // TCNT1 should read 0x3 (going up)
        NOP            ; // TCNT1 should read 0x4 (going up)
        NOP            ; // TCNT1 should read 0x5 (going up)
        LDS r19, 0x84  ; // TCNT1 should read 0x6 (going up)
        NOP            ; // TCNT1 should read 0x8 (going up)
        LDS r20, 0x84  ; // TCNT1 should read 0x7 (going up)
      `);

      const cpu = new CPU(program);
      new AVRTimer(cpu, timer1Config);

      // Listen to Port D's internal callback
      const gpioCallback = jest.fn();
      cpu.gpioTimerHooks[PORTD] = gpioCallback;

      const runner = new TestProgramRunner(cpu);
      runner.runInstructions(instructionCount);

      expect(cpu.readData(R17)).toEqual(0x4);
      expect(cpu.readData(R18)).toEqual(0x2);
      expect(cpu.readData(R19)).toEqual(0x6);
      expect(cpu.readData(R20)).toEqual(0x7);
    });
  });
});