diff options
| author | Selene ToyKeeper | 2019-09-28 23:14:16 -0600 |
|---|---|---|
| committer | Selene ToyKeeper | 2019-09-28 23:14:16 -0600 |
| commit | 0df827391ced9bb0b7114248c78b696de4676b25 (patch) | |
| tree | d6e57c1ee063c0f7bd9186b80cc6a4fd889c2514 /hwdef-Emisar_D1Sv2.h | |
| parent | un-hardcoded 255 as the highest PWM level, and used a "PWM_TOP" value instead (diff) | |
| download | anduril-0df827391ced9bb0b7114248c78b696de4676b25.tar.gz anduril-0df827391ced9bb0b7114248c78b696de4676b25.tar.bz2 anduril-0df827391ced9bb0b7114248c78b696de4676b25.zip | |
remapped D1S V2 pins to match new driver
(and changed a bit about how ADC / DIDR definitions work, since this now uses DIDR1 instead of DIDR0)
Diffstat (limited to 'hwdef-Emisar_D1Sv2.h')
| -rw-r--r-- | hwdef-Emisar_D1Sv2.h | 32 |
1 files changed, 16 insertions, 16 deletions
diff --git a/hwdef-Emisar_D1Sv2.h b/hwdef-Emisar_D1Sv2.h index 5912ea8..856643b 100644 --- a/hwdef-Emisar_D1Sv2.h +++ b/hwdef-Emisar_D1Sv2.h @@ -4,11 +4,11 @@ /* Emisar D1Sv2 driver layout (attiny1634) * * Pin / Name / Function - * 1 PA6 red aux LED (PWM1B) - * 2 PA5 green aux LED (PWM0B) - * 3 PA4 blue aux LED - * 4 PA3 battery voltage (ADC0) - * 5 PA2 (none) + * 1 PA6 (none) (PWM1B) (reserved for DD drivers) + * 2 PA5 R: red aux LED (PWM0B) + * 3 PA4 G: green aux LED + * 4 PA3 B: blue aux LED + * 5 PA2 (none) (reserved for L: button LED (on some models)) * 6 PA1 (none) * 7 PA0 (none) * 8 GND GND @@ -21,7 +21,7 @@ * 15 PC0 (none) PWM0A * 16 PB3 main LED PWM (PWM1A) * 17 PB2 MISO - * 18 PB1 MOSI + * 18 PB1 MOSI / battery voltage (ADC6) * 19 PB0 Opamp power * 20 PA7 e-switch (PCINT7) * ADC12 thermal sensor @@ -54,22 +54,22 @@ #define LED_ENABLE_PIN PB0 // pin 19, Opamp power #define LED_ENABLE_PORT PORTB // control port for PB0 -//#define PWM2_PIN PB0 // pin 19, Opamp power -// FIXME: -//#define PWM2_LVL OCR1B // OCR1B is the output compare register for PB1 #define USE_VOLTAGE_DIVIDER // use a dedicated pin, not VCC, because VCC input is flattened -#define VOLTAGE_PIN PA3 // Pin 4 / PA3 / ADC0 -#define VOLTAGE_ADC_DIDR ADC0D // digital input disable pin for PA3 +#define VOLTAGE_PIN PB1 // Pin 18 / PB1 / ADC6 +// pin to ADC mappings are in DS table 19-4 +#define VOLTAGE_ADC ADC6D // digital input disable pin for PB1 +// DIDR0/DIDR1 mappings are in DS section 19.13.5, 19.13.6 +#define VOLTAGE_ADC_DIDR DIDR1 // DIDR channel for ADC6D // DS tables 19-3, 19-4 // Bit 7 6 5 4 3 2 1 0 // REFS1 REFS0 REFEN ADC0EN MUX3 MUX2 MUX1 MUX0 -// MUX[3:0] = 0, 0, 0, 0 for ADC0 / PA3 +// MUX[3:0] = 0, 1, 1, 0 for ADC6 / PB1 // divided by ... // REFS[1:0] = 1, 0 for internal 1.1V reference // other bits reserved -#define ADMUX_VOLTAGE_DIVIDER 0b10000000 +#define ADMUX_VOLTAGE_DIVIDER 0b10000110 #define ADC_PRSCL 0x06 // clk/64 // Raw ADC readings at 4.4V and 2.2V @@ -87,9 +87,9 @@ #define TEMP_CHANNEL 0b00001111 // this light has aux LEDs under the optic -#define AUXLED_R_PIN PA6 // pin 1 -#define AUXLED_G_PIN PA5 // pin 2 -#define AUXLED_B_PIN PA4 // pin 3 +#define AUXLED_R_PIN PA5 // pin 2 +#define AUXLED_G_PIN PA4 // pin 3 +#define AUXLED_B_PIN PA3 // pin 4 #define AUXLED_RGB_PORT PORTA // PORTA or PORTB or PORTC #define AUXLED_RGB_DDR DDRA // DDRA or DDRB or DDRC #define AUXLED_RGB_PUE PUEA // PUEA or PUEB or PUEC |