1 files changed, 0 insertions, 130 deletions
diff --git a/hw/loneoceans/lume-x1-avr32dd20/hwdef.c b/hw/loneoceans/lume-x1-avr32dd20/hwdef.c
deleted file mode 100644
index 275037b..0000000
--- a/hw/loneoceans/lume-x1-avr32dd20/hwdef.c
+++ /dev/null
@@ -1,130 +0,0 @@
-// Copyright (C) 2017-2023 Selene ToyKeeper
-//               2021-2024 loneoceans
-// SPDX-License-Identifier: GPL-3.0-or-later
-
-//***********************************************
-//**  HELPER FUNCTIONS FOR LUME-X1-AVR32DD20   **
-//***********************************************
-
-#pragma once
-
-#include "fsm/chan-rgbaux.c"
-
-// Declare variables and functions to support UDR multiple power paths
-uint8_t power_path_level = 0;        // 0 = off, 1 = firefly, 2 = low, 3 = high
-uint8_t is_boost_currently_on = 0;   // for turn-on delay during first turn on
-
-void set_level_udr(uint8_t level);
-void set_power_path(uint8_t ramp_level);
-void set_level_zero();
-bool gradual_tick_main(uint8_t gt);
-
-Channel channels[] = {
-    { // main LEDs
-        .set_level    = set_level_udr,
-        .gradual_tick = gradual_tick_main
-    },
-    RGB_AUX_CHANNELS
-};
-
-// turn off
-void set_level_zero() {
-
-    power_path_level = 0;   // set power path level to 0
-    DAC_LVL  = 0;           // set DAC to 0
-    DAC_VREF = V10;         // set DAC Vref to lowest 
-
-    // turn off DC/DC converter and amplifier 
-    BST_ENABLE_PORT &= ~(1 << BST_ENABLE_PIN);
-    is_boost_currently_on = 0;
-
-    // turn off all UDR paths
-    LED_PATH1_PORT &= ~LED_PATH1_PIN;   
-    LED_PATH2_PORT &= ~LED_PATH2_PIN;
-    LED_PATH3_PORT &= ~LED_PATH3_PIN;
-}
-
-// UDR for set_level, which sets the led brightness based on ramp tables.
-// single set of LED(s), fully regulated boost at all levels
-void set_level_udr(uint8_t level) {
-    if (level == actual_level - 1) return;  //  no-op
-
-    // get the ramp data
-    PWM1_DATATYPE dac_lvl  = PWM1_GET(level) << 6;  // dac register is left-aligned
-    PWM2_DATATYPE dac_vref = PWM2_GET(level);
-
-    if(is_boost_currently_on != 1){
-        // boost is not on, enable buck and add boot-up delay
-        is_boost_currently_on = 1;
-        BST_ENABLE_PORT |= (1 << BST_ENABLE_PIN);   // turn on buck and amplifier
-        delay_4ms(BST_ON_DELAY/4);                  // boot-up delay
-    }
-    // set the DAC
-    DAC_LVL  = dac_lvl;
-    DAC_VREF = dac_vref;
-
-    // set the power paths
-    set_power_path(level);
-}
-
-// handles dynamic Vref used in the ramp tables 
-bool gradual_tick_main(uint8_t gt) {
-    // TODO overall smoothness can be improved due to gt using linear
-    // adjustments, but ramp table is non-linear.
-
-    // if Vref is the same, make gradual adjustments. 
-    // else, jump to the next ramp level and use set_level() to handle power paths.
-    PWM2_DATATYPE vref_next = PWM2_GET(gt); // DAC ramp table Vref
-
-    // if different vref level, make a ramp level adjustment..
-    if (vref_next != DAC_VREF) return true;  // use set_level() to handle normally
-
-    // .. else, same vref, adjust level gradually. 
-    PWM1_DATATYPE dac_next  = PWM1_GET(gt); // DAC ramp table data
-    PWM1_DATATYPE dac_curr  = DAC_LVL >> 6; // register is left-aligned
-
-    GRADUAL_ADJUST_SIMPLE(dac_next, dac_curr);
-    DAC_LVL = dac_curr << 6;
-    
-    if (dac_next == dac_curr) return true;  // done
-
-    return false;
-}
-
-// handles dynamic power pathways based on threshold levels  
-void set_power_path(uint8_t ramp_level){
-
-    ramp_level++; // convert to 1-based indexing
-
-    // check if the ramp level corresponds to a new power path or not;
-    // if it doesn't, no need to change anything.
-    if (ramp_level>=LED_PATH3_PIN_LEVEL_MIN){
-        if (power_path_level != 3){
-            // high Mode
-            LED_PATH1_PORT |= LED_PATH1_PIN;
-            LED_PATH2_PORT |= LED_PATH2_PIN;
-            LED_PATH3_PORT |= LED_PATH3_PIN;
-            power_path_level = 3;
-        }
-    }
-    else if (ramp_level>=LED_PATH2_PIN_LEVEL_MIN){
-        if (power_path_level != 2){
-            // low Mode
-            //LED_PATH1_PORT &= ~LED_PATH1_PIN;
-            LED_PATH1_PORT |= LED_PATH1_PIN;
-            LED_PATH2_PORT |= LED_PATH2_PIN;
-            LED_PATH3_PORT &= ~LED_PATH3_PIN;
-            power_path_level = 2;
-        }
-    }
-    else if (ramp_level>=LED_PATH1_PIN_LEVEL_MIN){
-        if (power_path_level != 1){
-            // firefly mode
-            LED_PATH1_PORT |= LED_PATH1_PIN;
-            LED_PATH2_PORT &= ~LED_PATH2_PIN;
-            LED_PATH3_PORT &= ~LED_PATH3_PIN;
-            power_path_level = 1;
-        }
-    }
-}
-