1 files changed, 118 insertions, 0 deletions
diff --git a/hw/thefreeman/avr32dd20-devkit/hwdef.c b/hw/thefreeman/avr32dd20-devkit/hwdef.c
new file mode 100644
index 0000000..3e5dd79
--- /dev/null
+++ b/hw/thefreeman/avr32dd20-devkit/hwdef.c
@@ -0,0 +1,118 @@
+// thefreeman boost driver 2.1 output helper functions
+// Copyright (C) 2023 Selene ToyKeeper
+// SPDX-License-Identifier: GPL-3.0-or-later
+#pragma once
+
+#include "fsm/chan-rgbaux.c"
+
+void set_level_zero();
+
+void set_level_main(uint8_t level);
+bool gradual_tick_main(uint8_t gt);
+
+
+Channel channels[] = {
+    { // main LEDs
+        .set_level    = set_level_main,
+        .gradual_tick = gradual_tick_main
+    },
+    RGB_AUX_CHANNELS
+};
+
+
+void set_level_zero() {
+    DAC_LVL  = 0;  // DAC off
+    DAC_VREF = V10;  // low Vref
+    HDR_ENABLE_PORT &= ~(1 << HDR_ENABLE_PIN);  // HDR off
+
+    // prevent post-off flash
+    IN_NFET_ENABLE_PORT |= (1 << IN_NFET_ENABLE_PIN);
+    delay_4ms(IN_NFET_DELAY_TIME/4);
+    IN_NFET_ENABLE_PORT &= ~(1 << IN_NFET_ENABLE_PIN);
+
+    // turn off boost last
+    BST_ENABLE_PORT &= ~(1 << BST_ENABLE_PIN);  // BST off
+}
+
+// single set of LEDs with 1 regulated power channel
+// and low/high HDR plus low/high Vref as different "gears"
+void set_level_main(uint8_t level) {
+    uint8_t noflash = 0;
+
+    // when turning on from off, use IN_NFET to prevent a flash
+    if ((! actual_level) && (level < HDR_ENABLE_LEVEL_MIN)) {
+        noflash = 1;
+        IN_NFET_ENABLE_PORT |= (1 << IN_NFET_ENABLE_PIN);
+    }
+
+    // BST on first, to give it a few extra microseconds to spin up
+    BST_ENABLE_PORT |= (1 << BST_ENABLE_PIN);
+
+    // pre-load ramp data so it can be assigned faster later
+    // DAC level register is left-aligned
+    PWM1_DATATYPE dac_lvl  = PWM1_GET(level) << 6;
+    PWM2_DATATYPE dac_vref = PWM2_GET(level);
+
+    // enable HDR on top half of ramp
+    if (level >= (HDR_ENABLE_LEVEL_MIN-1))
+        HDR_ENABLE_PORT |= (1 << HDR_ENABLE_PIN);
+    else
+        HDR_ENABLE_PORT &= ~(1 << HDR_ENABLE_PIN);
+
+    // set these in successive clock cycles to avoid getting out of sync
+    // (minimizes ramp bumps when changing gears)
+    DAC_LVL  = dac_lvl;
+    DAC_VREF = dac_vref;
+
+    if (noflash) {
+        // wait for flash prevention to finish
+        delay_4ms(IN_NFET_DELAY_TIME/4);
+        IN_NFET_ENABLE_PORT &= ~(1 << IN_NFET_ENABLE_PIN);
+    }
+}
+
+bool gradual_tick_main(uint8_t gt) {
+    // if HDR and Vref "engine gear" is the same, do a small adjustment...
+    // otherwise, simply jump to the next ramp level
+    //   and let set_level() handle any gear changes
+
+    // different gear = full adjustment
+    PWM2_DATATYPE vref_next = PWM2_GET(gt);
+    if (vref_next != DAC_VREF) return true;  // let parent set_level() for us
+
+    // same gear = small adjustment
+    PWM1_DATATYPE dac_now  = DAC_LVL >> 6;  // register is left-aligned
+    PWM1_DATATYPE dac_next = PWM1_GET(gt);
+
+    // adjust multiple times based on how far until the next level
+    // (so it adjusts faster/coarser for big steps)
+
+    int16_t diff = (dac_next - dac_now);
+    if (diff < 0) diff = -diff;
+
+    // ~70 max DAC levels per ramp step, 1 + (70 >> 3) = max 10
+    uint8_t steps;
+    steps = 1 + (diff >> 3);
+    for (uint8_t i=0; i<=steps; i++)
+        GRADUAL_ADJUST_SIMPLE(dac_next, dac_now);
+
+    DAC_LVL = dac_now << 6;
+
+    if (dac_next == dac_now) return true;  // done
+
+    return false;  // not done yet
+}
+
+
+uint8_t voltage_raw2cooked(uint16_t measurement) {
+    // In : 65535 * BATTLVL / 1.024V
+    // Out: uint8_t: Vbat * 40
+    // BATTLVL = Vbat * (100.0/(330+100)) = Vbat / 4.3
+    // So, Out = In * 4.3 / 1600
+    // (plus a bit of fudging to fix the slope and offset,
+    //  based on measuring actual hardware)
+    uint8_t result = (uint32_t)(measurement + (65535 * 4 / 1024))
+                     * 43 / 16128;
+    return result;
+}
+