aboutsummaryrefslogtreecommitdiff
path: root/spaghetti-monster/fsm-events.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* switched the rest of FSM + Anduril to use SPDX license headersSelene ToyKeeper2023-04-171-22/+5
| | | | | | | instead of full GPL headers (or all too often, nothing at all) There are a few "FIXME" entries where I'm not sure about the correct copyright.
* reworked nice_delay interrupt system and fixed some old issues:Selene ToyKeeper2020-09-271-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | - added set_state_deferred(), to avoid timing issues when changing state in loop() (fixes bug where first button press after version check was sometimes ignored, and similar issue after battcheck in simple UI) - reduced chance of eating first button press after simple UI's battcheck, because it spent an extra second waiting after finishing the readout, and it wasn't intuitive for a single click to go from "post-battcheck darkness" to "off" during that period - made interrupt_nice_delays() happen every time the state changes, instead of having nice_delay() explicitly check for state changes while it waits... (because the explicit check was buggy and used more ROM) - made nice_delay_ms() abort immediately when interrupt is set, instead of waiting 1ms before it even checks for the interrupt condition... this makes aborted animations end a lot faster, with less visible flickering - made blink_num() smaller and simpler, because changes listed above make it possible - slightly changed order of events in main(), to accommodate for changes above - fixed issue where battcheck would keep trying to blink out numbers while the user was holding 10H for voltage config mode - ... and reduced ROM size by about 38 bytes
* reorganized code in fsm-events.* to put things in a more coherent orderSelene ToyKeeper2020-09-141-52/+51
| | | | | | (no functional changes, but it does change the order of some code in ROM, so the compiled md5sum is different now)
* fixed bug: ticks_since_last_event wasn't getting reset on button hold releaseSelene ToyKeeper2020-09-141-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | The visible symptom was: Ramp up for 1s or longer, release, wait more than 1s, then hold again. It should ramp up, but it would ramp down instead. The clause for resetting ramp_direction wasn't happening, because the EV_tick counter started at a value higher than 1s where it would normally trigger. The underlying cause was a bit complicated. Recent changes in PCINT_inner() were causing ticks_since_last_event to get set to 0 (at push_event()) and then back to its previous value (at emit_current_event()). The EV_tick counter would then start at whatever the button release event used. The fix involved removing the part of emit_current_event() where it would set ticks_since_last_event to "arg". That line was a very old bug which simply hadn't caused any visible issues until recently. Instead, it needs to set ticks_since_last_event more carefully, at other locations. Specifically, it resets to 0 now in empty_event_sequence() and one more location in the deferred WDT handler (when HOLD_TIMEOUT triggers). Additionally, push_event() was only ever used from PCINT_inner()... so I moved the tick reset logic to PCINT_inner() instead. This allows us to decrease size by about 10 bytes, since PCINT_inner() no longer needs to copy the counter before it gets reset. However, it also means push_event() should never be called from any other function.
* recalibrated timing of nice_delay_ms() based on strobe speed measurements...Selene ToyKeeper2020-04-131-4/+4
| | | | gets very close to 24.2 Hz and 10.0 Hz for default strobe settings now
* fixed factory reset (wasn't running interrupt logic since it's deferred now)Selene ToyKeeper2019-11-141-6/+6
| | | | | | (also fixed issue where nice_delay_ms() was aborted during setup()) (and adjusted the timing to make factory reset similar to the speed it was before this change)
* refactored how interrupts work...Selene ToyKeeper2019-11-141-0/+3
| | | | | | | | | | | | | | | set a flag and return immediately, then handle the actual logic later during a less-critical code path Enables smarter responses to standby wakeups. Seems to fix missed button presses during standby, and most of the too-fast sleep ticks. Also eliminated waits from button state measurement, so it can happen easier during standby. (also eliminates the chance of an infinite loop on extra-noisy hardware) Also might improve timing-sensitive interrupts like attiny85 PWM channel 4, or a PWM-DSM hybrid technique I'd like to try. BUT this change also appears to break the thermal sensor, so that needs to be fixed.
* fixed some compile issues related to delay_4ms()Selene ToyKeeper2019-11-131-0/+2
|
* made the maximum number of clicks 15 instead of 14Selene ToyKeeper2019-09-241-1/+1
|
* merged a sanitized copy of the Emisar D4v2 branch; history summarized below:Selene ToyKeeper2019-08-051-8/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ------------------------------------------------------------ revno: 457 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-07-18 22:42:50 -0600 message: make sure no thermal events are handled while off (even though it shouldn't be possible, since it only happens after 15 minutes, and the light is only awake in muggle-off mode for 1 second) modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 456 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-07-18 20:09:58 -0600 message: don't measure temperature while asleep (fixes bug on D4 V2, where it would start flashing after 15 minutes turned off in muggle mode) (also should speed up response to battery voltage changes while asleep) modified: ToyKeeper/spaghetti-monster/fsm-adc.c ------------------------------------------------------------ revno: 455 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-07-18 20:05:56 -0600 message: made strobe brightness configurable per build target modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 454 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Wed 2019-07-10 10:22:44 -0600 message: made the "therm faster" code only affect ramping down, and fixed a couple minor logic issues in the thermal regulation code modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/fsm-adc.c ------------------------------------------------------------ revno: 452 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 08:18:25 -0600 message: fixed spelling error in D4 / D4V2 files modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4.h ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 451 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 08:16:57 -0600 message: fixed placement of #ifdefs on reboot loop prevention modified: ToyKeeper/spaghetti-monster/fsm-main.c ------------------------------------------------------------ revno: 450 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 08:15:59 -0600 message: made level_calc.py also find and show the channel transition points, so I won't have to do this manually all the time modified: bin/level_calc.py ------------------------------------------------------------ revno: 449 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 05:31:37 -0600 message: merged from fsm branch to get factory reset function modified: ToyKeeper/spaghetti-monster/anduril/anduril-manual.txt ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/anduril/anduril.txt ToyKeeper/spaghetti-monster/anduril/cfg-fw3a.h ToyKeeper/spaghetti-monster/fsm-main.c ToyKeeper/spaghetti-monster/fsm-misc.c ToyKeeper/spaghetti-monster/fsm-misc.h ------------------------------------------------------------ revno: 448 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 05:13:40 -0600 message: started adding some ideas for later (maybe), but not currently used... ... may remove again later modified: ToyKeeper/spaghetti-monster/fsm-adc.c ------------------------------------------------------------ revno: 447 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 05:13:11 -0600 message: adjusted D4 / D4v2 thermal response again; it really doesn't want to behave modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4.h ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 446 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Mon 2019-06-17 03:18:06 -0600 message: made d4 ramp slightly smoother at clock speed change modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4.h ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 445 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Mon 2019-06-17 03:17:40 -0600 message: improved D4S thermal response; less prone to overshooting and oscillation modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4s.h ------------------------------------------------------------ revno: 444 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-06-06 23:12:26 -0600 message: adjusted Emisar D4 thermal response values... (this light really doesn't want to behave thermally, so the values here don't quite get an ideal response, but they're a lot better than they were) modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4.h ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 443 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-06-06 23:11:08 -0600 message: made anduril raise brightness slower when doing thermal regulation, made hard turbo drop only activate when it's actually at turbo modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 442 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-06-06 23:09:54 -0600 message: made more thermal parameters configurable... - the speed of thermal history rotation (every 1s, 2s, or 4s) - prediction strength also made minimum time between temperature warnings factor in the lowpass, so the default is 5s again instead of 7s modified: ToyKeeper/spaghetti-monster/fsm-adc.c ------------------------------------------------------------ revno: 441 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Wed 2019-06-05 03:39:34 -0600 message: adjusted d4v2 ramp to hit 1x7135 exactly at level 4/7, turned off hard turbo drop because it doesn't seem to be needed any more modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 440 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Wed 2019-06-05 03:33:21 -0600 message: merged updates from fsm branch added: ToyKeeper/spaghetti-monster/anduril/cfg-ff-e01.h ToyKeeper/spaghetti-monster/fireflies-ui/cfg-ff-e07-2.h renamed: ToyKeeper/spaghetti-monster/fireflies-ui/cfg-ff-edc-thrower.h => ToyKeeper/spaghetti-monster/fireflies-ui/cfg-ff-e01.h modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/fireflies-ui/Makefile ToyKeeper/spaghetti-monster/fireflies-ui/build-all.sh ToyKeeper/spaghetti-monster/fireflies-ui/fireflies-ui.c ToyKeeper/spaghetti-monster/fireflies-ui/meta ToyKeeper/spaghetti-monster/fsm-events.h ToyKeeper/spaghetti-monster/fireflies-ui/cfg-ff-e01.h ------------------------------------------------------------ revno: 439 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-31 02:10:02 -0600 message: added D4v2-219 build for reduced power (only 75% FET) added: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2-219.h ------------------------------------------------------------ revno: 438 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-31 01:57:14 -0600 message: made MCU stay awake at boot long enough to get accurate voltage reading, sped up return-to-sleep delays, made RGB "voltage" preview mode last twice as long modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 437 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-31 01:56:18 -0600 message: sped up button release timeout slightly to reduce lag when turning off light modified: ToyKeeper/spaghetti-monster/fsm-events.h ------------------------------------------------------------ revno: 436 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-05-23 00:43:14 -0600 message: merged from fsm branch to get a bunch of recent updates modified: ... a lot of files ------------------------------------------------------------ revno: 435 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Tue 2019-05-21 14:25:28 -0600 message: no muggle mode on D4v2, by request modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 434 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Mon 2019-05-20 00:16:26 -0600 message: improved RGB aux LED previews for voltage mode and blinking mode modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 433 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-10 23:53:47 -0600 message: fixed D4v2 ramp shape and thermal limit modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 432 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-10 23:39:48 -0600 message: merged from lantern branch, to get newer candle mode added: ToyKeeper/spaghetti-monster/anduril/cfg-blf-lantern.h modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/fsm-ramping.c ToyKeeper/spaghetti-monster/fsm-ramping.h ------------------------------------------------------------ revno: 431 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-10 23:29:28 -0600 message: merged from upstream fsm branch added: ToyKeeper/spaghetti-monster/anduril/cfg-fw3a-219.h modified: ToyKeeper/spaghetti-monster/anduril/anduril-manual.txt ------------------------------------------------------------ revno: 430 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-10 23:27:55 -0600 message: use only red, green, and blue for voltage display... don't do color mixes modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 429 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-10 23:27:30 -0600 message: flash-tiny1634-fuses had a typo modified: bin/flash-tiny1634-fuses.sh ------------------------------------------------------------ revno: 428 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 18:03:28 -0600 message: fixed builds without sleep ticks enabled modified: ToyKeeper/spaghetti-monster/fsm-wdt.c ------------------------------------------------------------ revno: 427 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 18:01:17 -0600 message: made aux LEDs turn on at boot time, instead of waiting until sleep LVP measures the battery modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 426 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 18:00:34 -0600 message: implemented LVP in standby mode (which allows LVP to turn off high-drain aux LEDs while asleep, and allows RGB readout to change with battery charge) modified: ToyKeeper/spaghetti-monster/fsm-adc.c ToyKeeper/spaghetti-monster/fsm-adc.h ToyKeeper/spaghetti-monster/fsm-wdt.c ------------------------------------------------------------ revno: 425 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 03:14:33 -0600 message: enable tenclick thermal config in D4v2 target modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 424 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 03:14:16 -0600 message: added RGB support to lockout mode, improved RGB behavior, set defaults to low because the high mode is way too bright modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 423 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 02:36:55 -0600 message: got RGB aux LED modes working -- (off, low, high, blinking) and (7 colors + rainbow + voltage) (off mode only, for now, no lockout) modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 422 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 18:25:23 -0600 message: Turn off aux LEDs when voltage is low. They use too much power on high mode. modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 421 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 18:24:15 -0600 message: Calibrated D4v2 voltage. modified: ToyKeeper/hwdef-Emisar_D4v2.h ------------------------------------------------------------ revno: 420 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 17:48:51 -0600 message: fixed RGB aux LED low mode modified: ToyKeeper/hwdef-Emisar_D4v2.h ToyKeeper/spaghetti-monster/fsm-misc.c ------------------------------------------------------------ revno: 419 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 17:35:47 -0600 message: started on RGB aux LED support in Anduril, but it's just an early test right now modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 418 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 17:35:05 -0600 message: adjust ramping auto-aux-LED code to include RGB version (shut off when main LEDs are on) modified: ToyKeeper/spaghetti-monster/fsm-ramping.c ------------------------------------------------------------ revno: 417 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 17:33:08 -0600 message: started on tiny1634 RGB aux LED support (seems to work except for the "low" output mode) modified: ToyKeeper/hwdef-Emisar_D4v2.h ToyKeeper/spaghetti-monster/fsm-misc.c ToyKeeper/spaghetti-monster/fsm-misc.h ------------------------------------------------------------ revno: 416 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 16:22:15 -0600 message: fixed D4v2 PWM speed and delay speed, fixed hardware setup reference comments modified: ToyKeeper/hwdef-Emisar_D4v2.h ------------------------------------------------------------ revno: 415 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 16:20:50 -0600 message: fixed attiny1634 clock speed adjustments modified: ToyKeeper/tk-attiny.h ------------------------------------------------------------ revno: 414 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 15:38:52 -0600 message: renamed SWITCH_PIN_D (pin data) to SWITCH_PORT, to match AVR manual terminology (even though the value should be PINA or PINB or PINC) modified: ToyKeeper/hwdef-Emisar_D4v2.h ToyKeeper/spaghetti-monster/fsm-pcint.c ToyKeeper/tk-attiny.h ------------------------------------------------------------ revno: 413 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 01:48:10 -0600 message: added tiny1634 flashing scripts added: bin/flash-tiny1634-fuses.sh bin/flash-tiny1634.sh ------------------------------------------------------------ revno: 411 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 01:42:35 -0600 message: started adding tiny1634 support to FSM ... so much kludge, such need clean modified: ToyKeeper/spaghetti-monster/fsm-adc.c ToyKeeper/spaghetti-monster/fsm-main.c ToyKeeper/spaghetti-monster/fsm-pcint.c ToyKeeper/spaghetti-monster/fsm-wdt.c ToyKeeper/tk-attiny.h ------------------------------------------------------------ revno: 410 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 01:40:15 -0600 message: added D4v2-1634 config and hwdef files modified: ToyKeeper/hwdef-Emisar_D4v2.h ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 409 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 01:39:24 -0600 message: made build-all.sh detect attiny type from cfg file, and use it modified: ToyKeeper/spaghetti-monster/anduril/build-all.sh ------------------------------------------------------------ revno: 403 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sun 2019-04-14 18:14:51 -0600 message: merged updates from upstream added/modified: ... lots of files ------------------------------------------------------------ revno: 402 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sun 2019-04-14 18:08:08 -0600 message: merged in some aux LED code updates from anduril modified: ToyKeeper/spaghetti-monster/rampingios/rampingiosv3.c ------------------------------------------------------------ revno: 401 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2018-12-27 16:23:09 -0700 message: tk-attiny.h: started adding other MCU support also removed redundant eeprom size hints modified: ToyKeeper/tk-attiny.h ------------------------------------------------------------ revno: 400 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2018-12-27 16:21:59 -0700 message: made dynamic clocking safer and more portable (uses library function instead of direct register access) (lib disables interrupts properly, which I wasn't doing) modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/fsm-events.c ToyKeeper/spaghetti-monster/fsm-misc.c ToyKeeper/spaghetti-monster/spaghetti-monster.h
* Fixed the corner case of a button release when the previous state was ↵Selene ToyKeeper2018-11-111-1/+1
| | | | already released.
* Several fixes...Selene ToyKeeper2018-11-111-4/+9
| | | | | | | | | | - Made momentary+lockout modes smaller and work better. - Fixed buggy timing on hold events; made ticks_since_last_event reset when it should. - Reduced ROM size by caching volatile ticks_since_last_event sometimes. - Swapped what the top Event bit means, because it makes event handlers easier to write. - Made the maximum click event keep triggering if user keeps pressing, instead of dropping everything after the limit.
* Rewrote the event system to use a single byte for each event instead of an ↵Selene ToyKeeper2018-11-111-67/+29
| | | | | | | array of actions. Not thoroughly tested yet, not done yet, have only updated Anduril to fit, and only partially.
* fixed bug: clicking MAX_CLICKS+1 times and holding the final click would ↵Selene ToyKeeper2018-09-071-4/+8
| | | | | | | hang the MCU (also, reduced ROM size)
* Fixed bug introduced in trunk r211.1.9, where Anduril's goodnight mode ↵Selene ToyKeeper2018-09-011-2/+6
| | | | | | | | didn't work sometimes. The problem was that goodnight's EV_enter was executing before battcheck's loop() finished. This meant battcheck's exit code would turn the emitter off right after goodnight's init set it to the desired level.
* Reduced ROM size by making successive nice_delay_ms calls collapse any time ↵Selene ToyKeeper2018-08-221-1/+7
| | | | | | | | | the user completes an input sequence. All nice delays then get aborted until the next trip through the main() loop. Eliminates the need to wrap nice_delay_ms() calls and handle the exit condition. Also eliminates the risk of getting the UI out of sync with button events.
* Use either full or quarter speed in nice delays, based on output level.Selene ToyKeeper2017-10-011-1/+19
| | | | | | This fixes issues with some blinky modes being audible (particularly biking and lightning modes), without sacrificing the power savings for other blinkies (like beacon and battcheck).
* Added dynamic underclocking to FSM, instead of doing it manually in Anduril.Selene ToyKeeper2017-09-261-0/+30
|
* Got the 4th PWM channel to work, ish. (channel 4 is inverted though)Selene ToyKeeper2017-09-031-4/+0
| | | | | | | | | Moved go_to_suspend thing into main() instead of making each UI handle that during loop(). Made default_state() optional. Fixed bug where battcheck and other number readouts could interfere with the state which interrupted them. (they would sometimes turn the LED off after the new state had already started) Updated darkhorse's moon levels to match new ramp on D4 hardware.
* Fixed a crash when user presses the button more times than the UI supports.Selene ToyKeeper2017-08-281-1/+1
| | | | | (need to leave room for a trailing 0 in the array, oops)
* Added beacons/strobes to DarkHorse.Selene ToyKeeper2017-08-261-1/+6
| | | | | Added a way to explicitly cancel the current "nice" delay without changing state.
* Added battcheck mode to ramping-ui. It's bigger than I had hoped. :(Selene ToyKeeper2017-08-251-0/+12
| | | | | | Added fsm-misc.*, which currently only has interruptible blink functions in it. (for blinking out numbers and such)
* Added loop() to API, executes constantly.Selene ToyKeeper2017-08-241-0/+23
| | | | | | Added nice_delay_ms() to process events while waiting, and abort on state change. Converted ramping-ui strobe to smoothly variable with party and tactical modes.
* Completely reorganized SpaghettiMonster code into smaller logical pieces: ↵Selene ToyKeeper2017-08-191-0/+137
fsm-*.c and fsm-*.h.
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-28 18:07:42 +0000