aboutsummaryrefslogtreecommitdiff
path: root/spaghetti-monster/fsm-wdt.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* reorganized project files (part 1)Selene ToyKeeper2023-11-021-197/+0
| | | | | (just moved files, didn't change the contents yet, and nothing will work without updating #includes and build scripts and stuff)
* Partially fixed oscillating aux LED voltage colors while asleep.Selene ToyKeeper2023-07-081-2/+4
| | | | | | | | | | | | | | | | | | | | Amplitude is smaller, frequency is slower, but it can still happen sometimes at color boundaries on models with bright aux LEDs on high mode. (because that's not a measurement error, it's actually oscillating voltage) The Wurkkos TS11 in particular tends to bounce when crossing certain color boundaries, because the aux LEDs are bright and change the voltage enough to push it back and forth across the boundary. Also sped up voltage measurement during first few seconds after turning off, to compensate for slowdown caused by the lowpass filter... while slowing down measurements afterward to slow the oscillation. I tried a bunch of different methods, spanning a range of "stable but slow" to "fast but unstable", and kept code clauses for three representative methods. The one enabled by default is the best compromise I found to reduce the issue as much as possible while keeping readings reasonably responsive.
* fixed bug behind K93_LOCKOUT_KLUDGE which could exit lockout in solid aux modeSelene ToyKeeper2023-04-251-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (also reduced avg standby power by about 15 uA) (also fixed oscillating voltage mode colors, I think) The bug happened because sometimes sleep LVP would get triggered, because the ADC would read zero under some conditions. This in turn happened because the ADC needs the MCU to be at least partially awake in order to finish a measurement. So in standby mode, with the MCU only waking up very briefly to send a sleep tick and go back to sleep, the ADC required several cycles (like 375ms to 625ms) to finish a single measurement. This varied depending on how many instructions the MCU executed while it was awake. In the single-color mode, so few instructions were being executed that the ADC seemed to time out and abort its measurement, returning a zero. Then a low voltage warning was sent, which knocked the light back into "Off" mode. Adding no-op instructions inside the single-color clause was sufficient to prevent the ADC from timing out, because it kept the MCU awake just barely long enough. But it was a kludge, and it still took like half a second to finish a measurement, and the measurements were noisy. It also used more power, because it required keeping the ADC powered on far too long. This fix puts the MCU into "ADC Noise Reduction" mode instead, when a voltage measurement is needed during sleep. It reduces noise to make measurements more stable... but more importantly, it lets the measurement finish in like 0.5ms instead of 500ms. So it uses less power and isn't dependent on the number of calculations the MCU does during each "sleep tick". As a bonus, this can also measure voltage much more often, while still using less total energy than before. It was once every 8 seconds, and now it's once per second. Avg power use in aux low mode, on a D4Sv2: (avg of 30k samples each) - before: 101 uA - after: 86 uA
* switched the rest of FSM + Anduril to use SPDX license headersSelene ToyKeeper2023-04-171-22/+5
| | | | | | | instead of full GPL headers (or all too often, nothing at all) There are a few "FIXME" entries where I'm not sure about the correct copyright.
* Fix 1-Series standby tick speed, use 2C TurboGabriel Hart2020-12-201-1/+1
|
* Add AVR 1-Series and t1616 board and scriptsGabriel Hart2020-12-181-0/+20
|
* fixed bug: ticks_since_last_event wasn't getting reset on button hold releaseSelene ToyKeeper2020-09-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | The visible symptom was: Ramp up for 1s or longer, release, wait more than 1s, then hold again. It should ramp up, but it would ramp down instead. The clause for resetting ramp_direction wasn't happening, because the EV_tick counter started at a value higher than 1s where it would normally trigger. The underlying cause was a bit complicated. Recent changes in PCINT_inner() were causing ticks_since_last_event to get set to 0 (at push_event()) and then back to its previous value (at emit_current_event()). The EV_tick counter would then start at whatever the button release event used. The fix involved removing the part of emit_current_event() where it would set ticks_since_last_event to "arg". That line was a very old bug which simply hadn't caused any visible issues until recently. Instead, it needs to set ticks_since_last_event more carefully, at other locations. Specifically, it resets to 0 now in empty_event_sequence() and one more location in the deferred WDT handler (when HOLD_TIMEOUT triggers). Additionally, push_event() was only ever used from PCINT_inner()... so I moved the tick reset logic to PCINT_inner() instead. This allows us to decrease size by about 10 bytes, since PCINT_inner() no longer needs to copy the counter before it gets reset. However, it also means push_event() should never be called from any other function.
* deleted commented-out WDT code from previous revisionSelene ToyKeeper2020-03-161-7/+0
| | | | | (had only saved it so there would be a note in history about why it's gone)
* cleaned up WDT ADC timer code slightly, and removed a bit of redundant codeSelene ToyKeeper2020-03-161-6/+8
|
* tried to make thermal code a bit less twitchy...Selene ToyKeeper2020-03-131-1/+1
| | | | | it regulates really fast on D4, but once it's stable, the adjustments are too large
* went back to continuous lowpass because it had the best noise reductionSelene ToyKeeper2020-02-281-1/+1
| | | | | (also, now treating smoothed ADC values as 11-bit, with the lowest 5 bits chopped off to eliminate noise)
* saving state of ADC / WDT refactoring before doing more changes... what ↵Selene ToyKeeper2020-01-301-5/+8
| | | | | | | | | | | | | | | changed so far: - removed LVP lowpass and thermal regulation lowpass logic; it's probably redundant now - slowed ADC deferred logic timing to 4X per second instead of 16X, because there doesn't seem to be much reason to do it any faster - reduced thermal event rate-limit to just 1 second, for more responsive regulation - added "EV_temperature_okay" signal, to help stop adjustments at an appropriate time instead of going to far - sped up sleep LVP to one measurement every 8 seconds instead of 16, to help the aux LEDs respond to voltage changes faster (effect on standby time is negligible) - make sure the WDT doesn't set the ADC channel or counter... except in standby mode
* rewrote ADC code to use a continuous lowpass system on all measurements, to ↵Selene ToyKeeper2020-01-291-2/+4
| | | | | | eliminate noise and maybe increase precision (thermal code still needs to be rewritten though)
* cleaned up WDT code a bit, reduced total size,Selene ToyKeeper2019-11-191-27/+24
| | | | | | fixed bug where ticks_since_last could have the wrong value sometimes, reduced power use in sleep mode very slightly by skipping button-handling code while asleep
* fixed ADC code; measures and behaves correctly now, and is easier to read...Selene ToyKeeper2019-11-141-1/+1
| | | | | | ... but factory reset's auto-calibrate still doesn't get the right values for some reason (manual calibration works, but not auto)
* refactored how interrupts work...Selene ToyKeeper2019-11-141-7/+15
| | | | | | | | | | | | | | | set a flag and return immediately, then handle the actual logic later during a less-critical code path Enables smarter responses to standby wakeups. Seems to fix missed button presses during standby, and most of the too-fast sleep ticks. Also eliminated waits from button state measurement, so it can happen easier during standby. (also eliminates the chance of an infinite loop on extra-noisy hardware) Also might improve timing-sensitive interrupts like attiny85 PWM channel 4, or a PWM-DSM hybrid technique I'd like to try. BUT this change also appears to break the thermal sensor, so that needs to be fixed.
* merged a sanitized copy of the Emisar D4v2 branch; history summarized below:Selene ToyKeeper2019-08-051-22/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ------------------------------------------------------------ revno: 457 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-07-18 22:42:50 -0600 message: make sure no thermal events are handled while off (even though it shouldn't be possible, since it only happens after 15 minutes, and the light is only awake in muggle-off mode for 1 second) modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 456 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-07-18 20:09:58 -0600 message: don't measure temperature while asleep (fixes bug on D4 V2, where it would start flashing after 15 minutes turned off in muggle mode) (also should speed up response to battery voltage changes while asleep) modified: ToyKeeper/spaghetti-monster/fsm-adc.c ------------------------------------------------------------ revno: 455 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-07-18 20:05:56 -0600 message: made strobe brightness configurable per build target modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 454 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Wed 2019-07-10 10:22:44 -0600 message: made the "therm faster" code only affect ramping down, and fixed a couple minor logic issues in the thermal regulation code modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/fsm-adc.c ------------------------------------------------------------ revno: 452 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 08:18:25 -0600 message: fixed spelling error in D4 / D4V2 files modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4.h ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 451 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 08:16:57 -0600 message: fixed placement of #ifdefs on reboot loop prevention modified: ToyKeeper/spaghetti-monster/fsm-main.c ------------------------------------------------------------ revno: 450 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 08:15:59 -0600 message: made level_calc.py also find and show the channel transition points, so I won't have to do this manually all the time modified: bin/level_calc.py ------------------------------------------------------------ revno: 449 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 05:31:37 -0600 message: merged from fsm branch to get factory reset function modified: ToyKeeper/spaghetti-monster/anduril/anduril-manual.txt ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/anduril/anduril.txt ToyKeeper/spaghetti-monster/anduril/cfg-fw3a.h ToyKeeper/spaghetti-monster/fsm-main.c ToyKeeper/spaghetti-monster/fsm-misc.c ToyKeeper/spaghetti-monster/fsm-misc.h ------------------------------------------------------------ revno: 448 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 05:13:40 -0600 message: started adding some ideas for later (maybe), but not currently used... ... may remove again later modified: ToyKeeper/spaghetti-monster/fsm-adc.c ------------------------------------------------------------ revno: 447 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-07-06 05:13:11 -0600 message: adjusted D4 / D4v2 thermal response again; it really doesn't want to behave modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4.h ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 446 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Mon 2019-06-17 03:18:06 -0600 message: made d4 ramp slightly smoother at clock speed change modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4.h ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 445 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Mon 2019-06-17 03:17:40 -0600 message: improved D4S thermal response; less prone to overshooting and oscillation modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4s.h ------------------------------------------------------------ revno: 444 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-06-06 23:12:26 -0600 message: adjusted Emisar D4 thermal response values... (this light really doesn't want to behave thermally, so the values here don't quite get an ideal response, but they're a lot better than they were) modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4.h ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 443 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-06-06 23:11:08 -0600 message: made anduril raise brightness slower when doing thermal regulation, made hard turbo drop only activate when it's actually at turbo modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 442 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-06-06 23:09:54 -0600 message: made more thermal parameters configurable... - the speed of thermal history rotation (every 1s, 2s, or 4s) - prediction strength also made minimum time between temperature warnings factor in the lowpass, so the default is 5s again instead of 7s modified: ToyKeeper/spaghetti-monster/fsm-adc.c ------------------------------------------------------------ revno: 441 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Wed 2019-06-05 03:39:34 -0600 message: adjusted d4v2 ramp to hit 1x7135 exactly at level 4/7, turned off hard turbo drop because it doesn't seem to be needed any more modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 440 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Wed 2019-06-05 03:33:21 -0600 message: merged updates from fsm branch added: ToyKeeper/spaghetti-monster/anduril/cfg-ff-e01.h ToyKeeper/spaghetti-monster/fireflies-ui/cfg-ff-e07-2.h renamed: ToyKeeper/spaghetti-monster/fireflies-ui/cfg-ff-edc-thrower.h => ToyKeeper/spaghetti-monster/fireflies-ui/cfg-ff-e01.h modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/fireflies-ui/Makefile ToyKeeper/spaghetti-monster/fireflies-ui/build-all.sh ToyKeeper/spaghetti-monster/fireflies-ui/fireflies-ui.c ToyKeeper/spaghetti-monster/fireflies-ui/meta ToyKeeper/spaghetti-monster/fsm-events.h ToyKeeper/spaghetti-monster/fireflies-ui/cfg-ff-e01.h ------------------------------------------------------------ revno: 439 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-31 02:10:02 -0600 message: added D4v2-219 build for reduced power (only 75% FET) added: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2-219.h ------------------------------------------------------------ revno: 438 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-31 01:57:14 -0600 message: made MCU stay awake at boot long enough to get accurate voltage reading, sped up return-to-sleep delays, made RGB "voltage" preview mode last twice as long modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 437 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-31 01:56:18 -0600 message: sped up button release timeout slightly to reduce lag when turning off light modified: ToyKeeper/spaghetti-monster/fsm-events.h ------------------------------------------------------------ revno: 436 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2019-05-23 00:43:14 -0600 message: merged from fsm branch to get a bunch of recent updates modified: ... a lot of files ------------------------------------------------------------ revno: 435 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Tue 2019-05-21 14:25:28 -0600 message: no muggle mode on D4v2, by request modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 434 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Mon 2019-05-20 00:16:26 -0600 message: improved RGB aux LED previews for voltage mode and blinking mode modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 433 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-10 23:53:47 -0600 message: fixed D4v2 ramp shape and thermal limit modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 432 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-10 23:39:48 -0600 message: merged from lantern branch, to get newer candle mode added: ToyKeeper/spaghetti-monster/anduril/cfg-blf-lantern.h modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/fsm-ramping.c ToyKeeper/spaghetti-monster/fsm-ramping.h ------------------------------------------------------------ revno: 431 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-10 23:29:28 -0600 message: merged from upstream fsm branch added: ToyKeeper/spaghetti-monster/anduril/cfg-fw3a-219.h modified: ToyKeeper/spaghetti-monster/anduril/anduril-manual.txt ------------------------------------------------------------ revno: 430 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-10 23:27:55 -0600 message: use only red, green, and blue for voltage display... don't do color mixes modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 429 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-10 23:27:30 -0600 message: flash-tiny1634-fuses had a typo modified: bin/flash-tiny1634-fuses.sh ------------------------------------------------------------ revno: 428 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 18:03:28 -0600 message: fixed builds without sleep ticks enabled modified: ToyKeeper/spaghetti-monster/fsm-wdt.c ------------------------------------------------------------ revno: 427 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 18:01:17 -0600 message: made aux LEDs turn on at boot time, instead of waiting until sleep LVP measures the battery modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 426 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 18:00:34 -0600 message: implemented LVP in standby mode (which allows LVP to turn off high-drain aux LEDs while asleep, and allows RGB readout to change with battery charge) modified: ToyKeeper/spaghetti-monster/fsm-adc.c ToyKeeper/spaghetti-monster/fsm-adc.h ToyKeeper/spaghetti-monster/fsm-wdt.c ------------------------------------------------------------ revno: 425 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 03:14:33 -0600 message: enable tenclick thermal config in D4v2 target modified: ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 424 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 03:14:16 -0600 message: added RGB support to lockout mode, improved RGB behavior, set defaults to low because the high mode is way too bright modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 423 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sat 2019-05-04 02:36:55 -0600 message: got RGB aux LED modes working -- (off, low, high, blinking) and (7 colors + rainbow + voltage) (off mode only, for now, no lockout) modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 422 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 18:25:23 -0600 message: Turn off aux LEDs when voltage is low. They use too much power on high mode. modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ------------------------------------------------------------ revno: 421 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 18:24:15 -0600 message: Calibrated D4v2 voltage. modified: ToyKeeper/hwdef-Emisar_D4v2.h ------------------------------------------------------------ revno: 420 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 17:48:51 -0600 message: fixed RGB aux LED low mode modified: ToyKeeper/hwdef-Emisar_D4v2.h ToyKeeper/spaghetti-monster/fsm-misc.c ------------------------------------------------------------ revno: 419 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 17:35:47 -0600 message: started on RGB aux LED support in Anduril, but it's just an early test right now modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 418 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 17:35:05 -0600 message: adjust ramping auto-aux-LED code to include RGB version (shut off when main LEDs are on) modified: ToyKeeper/spaghetti-monster/fsm-ramping.c ------------------------------------------------------------ revno: 417 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 17:33:08 -0600 message: started on tiny1634 RGB aux LED support (seems to work except for the "low" output mode) modified: ToyKeeper/hwdef-Emisar_D4v2.h ToyKeeper/spaghetti-monster/fsm-misc.c ToyKeeper/spaghetti-monster/fsm-misc.h ------------------------------------------------------------ revno: 416 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 16:22:15 -0600 message: fixed D4v2 PWM speed and delay speed, fixed hardware setup reference comments modified: ToyKeeper/hwdef-Emisar_D4v2.h ------------------------------------------------------------ revno: 415 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 16:20:50 -0600 message: fixed attiny1634 clock speed adjustments modified: ToyKeeper/tk-attiny.h ------------------------------------------------------------ revno: 414 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 15:38:52 -0600 message: renamed SWITCH_PIN_D (pin data) to SWITCH_PORT, to match AVR manual terminology (even though the value should be PINA or PINB or PINC) modified: ToyKeeper/hwdef-Emisar_D4v2.h ToyKeeper/spaghetti-monster/fsm-pcint.c ToyKeeper/tk-attiny.h ------------------------------------------------------------ revno: 413 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 01:48:10 -0600 message: added tiny1634 flashing scripts added: bin/flash-tiny1634-fuses.sh bin/flash-tiny1634.sh ------------------------------------------------------------ revno: 411 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 01:42:35 -0600 message: started adding tiny1634 support to FSM ... so much kludge, such need clean modified: ToyKeeper/spaghetti-monster/fsm-adc.c ToyKeeper/spaghetti-monster/fsm-main.c ToyKeeper/spaghetti-monster/fsm-pcint.c ToyKeeper/spaghetti-monster/fsm-wdt.c ToyKeeper/tk-attiny.h ------------------------------------------------------------ revno: 410 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 01:40:15 -0600 message: added D4v2-1634 config and hwdef files modified: ToyKeeper/hwdef-Emisar_D4v2.h ToyKeeper/spaghetti-monster/anduril/cfg-emisar-d4v2.h ------------------------------------------------------------ revno: 409 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Fri 2019-05-03 01:39:24 -0600 message: made build-all.sh detect attiny type from cfg file, and use it modified: ToyKeeper/spaghetti-monster/anduril/build-all.sh ------------------------------------------------------------ revno: 403 [merge] committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sun 2019-04-14 18:14:51 -0600 message: merged updates from upstream added/modified: ... lots of files ------------------------------------------------------------ revno: 402 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Sun 2019-04-14 18:08:08 -0600 message: merged in some aux LED code updates from anduril modified: ToyKeeper/spaghetti-monster/rampingios/rampingiosv3.c ------------------------------------------------------------ revno: 401 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2018-12-27 16:23:09 -0700 message: tk-attiny.h: started adding other MCU support also removed redundant eeprom size hints modified: ToyKeeper/tk-attiny.h ------------------------------------------------------------ revno: 400 committer: Selene ToyKeeper <git@toykeeper.net> branch nick: emisar-d4v2 timestamp: Thu 2018-12-27 16:21:59 -0700 message: made dynamic clocking safer and more portable (uses library function instead of direct register access) (lib disables interrupts properly, which I wasn't doing) modified: ToyKeeper/spaghetti-monster/anduril/anduril.c ToyKeeper/spaghetti-monster/fsm-events.c ToyKeeper/spaghetti-monster/fsm-misc.c ToyKeeper/spaghetti-monster/spaghetti-monster.h
* Fixed the sleep tick counter wrapping around to 0 instead of 32768.Selene ToyKeeper2018-11-111-1/+3
|
* Several fixes...Selene ToyKeeper2018-11-111-8/+15
| | | | | | | | | | - Made momentary+lockout modes smaller and work better. - Fixed buggy timing on hold events; made ticks_since_last_event reset when it should. - Reduced ROM size by caching volatile ticks_since_last_event sometimes. - Swapped what the top Event bit means, because it makes event handlers easier to write. - Made the maximum click event keep triggering if user keeps pressing, instead of dropping everything after the limit.
* Rewrote the event system to use a single byte for each event instead of an ↵Selene ToyKeeper2018-11-111-21/+17
| | | | | | | array of actions. Not thoroughly tested yet, not done yet, have only updated Anduril to fit, and only partially.
* Changed halfsleep mode to TICK_DURING_STANDBY. Added blinking indicator LED ↵Selene ToyKeeper2018-06-171-7/+16
| | | | support to Anduril.
* Implemented halfsleep mode.Selene ToyKeeper2018-06-171-0/+17
| | | | | | Will probably change it quite a bit though, so I'm checking in changes first. Needs to be "tick during standby" instead of "half sleep".
* Work around issues related to ADC interrupt auto-triggering itself.Selene ToyKeeper2018-01-241-2/+2
| | | | | | (was firing off 1000 times faster than desired, causing several issues) (now only executes when explicitly requested by the WDT)
* Debouncing finally works (at least, it does on my two test hosts).Selene ToyKeeper2017-12-121-31/+7
|
* Greatly improved button debouncing. Helps a lot on FW3A and my light saber.Selene ToyKeeper2017-12-111-2/+31
| | | | | Debouncing isn't 100% yet though.
* Added reversing to Anduril. Made EV_tick always send 0 while in "hold" state.Selene ToyKeeper2017-09-281-3/+8
| | | | | Reversing is a build-time option.
* Completely reorganized SpaghettiMonster code into smaller logical pieces: ↵Selene ToyKeeper2017-08-191-0/+107
fsm-*.c and fsm-*.h.
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-28 23:18:35 +0000