aboutsummaryrefslogtreecommitdiff
path: root/spaghetti-monster (follow)
Commit message (Collapse)AuthorAgeFilesLines
* just whitespace / commentsSelene ToyKeeper2023-03-283-4/+4
|
* fast-blink the aux LED in standby when battery is lowSelene ToyKeeper2023-02-105-34/+54
| | | | | | | | 3.3V and up: normal aux LED modes 2.9V to 3.3V: fast blink under 2.9V: off (only on lights with no RGB aux)
* fixed voltage calibration resolution on SP10 ProSelene ToyKeeper2022-10-211-2/+2
| | | | | and other devices which use a voltage divider (it was 0.1V per step, and is now 0.05V per step)
* allow supporting single-color and RGB side button in the same buildSelene ToyKeeper2022-07-297-12/+46
| | | | | | | | | | | (new D1v2 comes in both flavors, and it's easier for everyone if they can use the same firmware) Also, removed lockout-abort bug on D1v2 (and DM11, I think). Hopefully some day I'll have time to update to a newer compiler, and then hopefully it won't have this issue any more... but for now, it still uses a kludge to trick the compiler into working.
* added Emisar D1v2 models (old FET+7135, new linear+FET, new linear-only)Selene ToyKeeper2022-07-294-6/+52
|
* sp10-pro: hard reset phase while turning off, fixes shutoff bug without a delaySelene ToyKeeper2022-04-141-8/+17
| | | | | (also, made phase hacks individually selectable)
* moved fuses from cfg to hwdef, renamed LED_EN/DISABLE_DELAY to LED_ON/OFF_DELAYSelene ToyKeeper2022-04-142-32/+22
| | | | | (also really should rename LED_* to CH1_* and LED2_* to CH2_*)
* merged gchart's latest changes:Selene ToyKeeper2022-04-144-1/+92
|\ | | | | | | | | | | | | | | | | - sp10-pro shutoff fix - mt35-mini support - power channel enable/disable timing delays (though I wouldn't recommend doing 80ms like the thefreeman code does, since that's more than one WDT cycle (16ms))
| * Created LED_DISABLE_DELAY option and enabled it for SP10 Pro to hopefully ↵Gabriel Hart2022-04-132-1/+5
| | | | | | | | eliminate flashes when turning off at certain levels
| * Added FUSES section to SP10 Pro for building ELF file with BOD Active fuse ↵Gabriel Hart2022-04-122-4/+16
| | | | | | | | setting
| * Merge from TK's main A2 branch thru Rev 647 which includes several patches ↵Gabriel Hart2022-04-1133-108/+635
| |\ | |/ |/| | | for the Sofirn SP10 Pro after TK merge that branch in
* | revert spurious change to version.hSelene ToyKeeper2022-04-091-1/+4
| | | | | | | | | | (forgot to revert it after build test, before merge commit)
* | merged sofirn sp10-pro branch (should have done it months ago, but forgot)Selene ToyKeeper2022-04-0915-45/+191
|\ \
| * \ merged anduril2 branch for upstream changesSelene ToyKeeper2021-12-1615-6/+272
| |\ \
| * | | enabled manual memory and timer by default;Selene ToyKeeper2021-11-131-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | reset to ~6 lm (level 50/150) after being off for 10 minutes This sets the factory-reset default settings and affects Simple UI, so it will likely need confirmation from Sofirn.
| * | | increased SP10 PWM speed as much as possible without making ramp bumpy, and ↵Selene ToyKeeper2021-11-133-5/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | made party strobe pulses much faster Reduced max PWM TOP to 3072, because 2048 wasn't enough and 4096 was more than necessary. Also, Ch1 lumens / 256 / ch2 lumens = 6, so 256 * 6 * 2 is the lowest value which allows ch1 to start at half of ch2's power. I tried 1536 initially, but it made the ramp visibly malformed at the channel boundary. However, 3072 seems about right. Implemented a non-linear PWM_TOP ramp-down in level_calc, to allow it to converge faster and reduce the number of levels with visible pulses. Added an option to keep the regulator chips on between strobe pulses, by keeping the LEDs at moon instead of turning completely off. This allows the SP10 party strobe to use much shorter, more consistent pulses.
| * | | reduced SP10 firefly/moon power usage slightly, by keeping CPU underclocked ↵Selene ToyKeeper2021-11-061-1/+1
| | | | | | | | | | | | | | | | more until ch2 activates
| * | | reduced SP10 downward ramp flicker even moreSelene ToyKeeper2021-11-061-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | (reduced PWM_TOP minimum timing window to 32 cpu cycles, to allow TOP value of 64 to work better)
| * | | greatly smoothed out SP10 ramp, and configured defaultsSelene ToyKeeper2021-11-061-16/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | also fixed random ramp stuttering, by adding phase-reset register to hwdef (though it still has a brief stutter sometimes while ramping down across the channel boundary, at least it always seems to be smooth while going up now)
| * | | merged recent anduril2 branch updatesSelene ToyKeeper2021-11-0615-78/+166
| |\ \ \
| * \ \ \ merged gchart's recent changesSelene ToyKeeper2021-11-0611-73/+188
| |\ \ \ \
| * \ \ \ \ merged gchart's SP10 Pro branchSelene ToyKeeper2021-09-1910-36/+117
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | (minus the change to version.h)
* | | | | | | k9.3 tint-toggle build is broken, generate a better fail error (until it's ↵Selene ToyKeeper2022-04-092-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | fixed)
* | | | | | | added KR4-12V build, fixed model number for DM11-SBT90 buildSelene ToyKeeper2022-03-303-1/+73
| | | | | | |
* | | | | | | added Noctigon DM11-SBT90.2 buildSelene ToyKeeper2022-03-241-0/+73
| |_|_|_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | (which is mostly like the regular linear+FET build, but has the switch on a different pin for some reason)
* | | | | | fixed bug where tint-ramping could end up 1 brightness ramp step different ↵Selene ToyKeeper2021-12-131-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | than it started
* | | | | | Added "Lockout 3C -> Off", changed Lockout 4H blink (light) to a blip (dark),Selene ToyKeeper2021-12-134-1/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | adjusted a couple builds which overflowed.
* | | | | | enabled SOS mode on lights which have enough room for itSelene ToyKeeper2021-12-083-2/+4
| | | | | |
* | | | | | added a compile option for USE_LOWPASS_WHILE_ASLEEP,Selene ToyKeeper2021-12-085-5/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | but it doesn't actually fix the issue I was hoping it'd fix, so it's disabled by default (when the battery is right on a threshold between colors for aux LED "voltage" mode, it can bounce between colors until the cell isn't on the boundary any more... but a simple lowpass doesn't really help) (but I also didn't want to throw out the code, in case it's useful later as a reference for a more effective solution)
* | | | | | fixed Ramp 3H with Anduril 2 style turboSelene ToyKeeper2021-12-083-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (it was going to ceiling instead of full power) (also had to disable battcheck calibration on some large builds to make room)
* | | | | | a bit more fine-tuning for DM11Selene ToyKeeper2021-11-123-8/+9
| | | | | |
* | | | | | added DM11 to MODELS fileSelene ToyKeeper2021-11-121-0/+3
| | | | | |
* | | | | | merged anduril2 branch for updatesSelene ToyKeeper2021-11-1216-83/+173
|\ \ \ \ \ \ | | |_|_|/ / | |/| | | |
| * | | | | fixed KR4-tintramp build (switch wasn't working) and added it to MODELSSelene ToyKeeper2021-11-031-0/+1
| | | | | |
| * | | | | reset tint while changing tint ramp styleSelene ToyKeeper2021-11-031-1/+5
| | | | | |
| * | | | | added runtime config to choose tint-ramping or tint-toggleSelene ToyKeeper2021-11-038-32/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (Off->9H option 1, 0=smooth, 1=toggle)
| * | | | | added KR4-tintramp buildSelene ToyKeeper2021-11-031-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (is basically identical to D4Sv2-tintramp, but with the switch on a different pin, and no button LED)
| * | | | | documented number entry 1H action (add 10) in UI tableSelene ToyKeeper2021-10-311-0/+1
| | | | | |
| * | | | | made d4sv2-tintramp-fet work the same as no-fet version, but with added FET ↵Selene ToyKeeper2021-10-312-9/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | from ramp step 141 to 150 (0 to 100% power from 1 to 130, 101% to 200% from 131 to 150, and +DD FET from 141 to 150) also calibrated candle mode a bit better
| * | | | | fixed flicker on inactive tint ramp channel during rampingSelene ToyKeeper2021-10-311-2/+8
| | | | | |
| * | | | | added "200%" turbo on tint-ramping lights: D4S and LT1Selene ToyKeeper2021-10-314-35/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Normal ramp from 0% to 100% power on levels 1 to 130, then 101% to 200% power at levels 131 to 150 using both channels at maximum for turbo. When either channel would go over 100%, the extra spills over to the other channel.
* | | | | | fine-tuned DM11-12V build a bit based on actual measurementsSelene ToyKeeper2021-11-121-7/+11
| | | | | |
* | | | | | renamed MD11 -> DM11 because Hank changed the product nameSelene ToyKeeper2021-10-123-6/+6
| | | | | |
* | | | | | added early initial attempt at a boost/12V/6V version of the MD11Selene ToyKeeper2021-10-041-0/+70
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (had to guess about some hardware details, unsure if correct)
* | | | | | added MD11-noFET, tweaked values in MD11-FET build tooSelene ToyKeeper2021-09-242-3/+46
| | | | | |
* | | | | | added dynamic PWM and FET to MD11Selene ToyKeeper2021-09-241-14/+25
| | | | | |
* | | | | | just a few adjustments to start withSelene ToyKeeper2021-09-241-12/+11
| | | | | |
* | | | | | copied Noctigon K1 -> MD11 to start defining a new lightSelene ToyKeeper2021-09-241-0/+61
| | | | | |
| | | | | * Tweak a few MT35Mini settingsGabriel Hart2022-01-293-2/+54
| | | | | |
| | | | | * Experimental: add optional delay when using LED_ENABLE_PIN to avoid flashes ↵Gabriel Hart2022-01-052-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | of light (this time for LED2_ENABLE pin)
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-28 18:10:55 +0000