aboutsummaryrefslogtreecommitdiff
path: root/spaghetti-monster (follow)
Commit message (Collapse)AuthorAgeFilesLines
...
| * | | | | fixed flicker on inactive tint ramp channel during rampingSelene ToyKeeper2021-10-311-2/+8
| | | | | |
| * | | | | added "200%" turbo on tint-ramping lights: D4S and LT1Selene ToyKeeper2021-10-314-35/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Normal ramp from 0% to 100% power on levels 1 to 130, then 101% to 200% power at levels 131 to 150 using both channels at maximum for turbo. When either channel would go over 100%, the extra spills over to the other channel.
* | | | | | fine-tuned DM11-12V build a bit based on actual measurementsSelene ToyKeeper2021-11-121-7/+11
| | | | | |
* | | | | | renamed MD11 -> DM11 because Hank changed the product nameSelene ToyKeeper2021-10-123-6/+6
| | | | | |
* | | | | | added early initial attempt at a boost/12V/6V version of the MD11Selene ToyKeeper2021-10-041-0/+70
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (had to guess about some hardware details, unsure if correct)
* | | | | | added MD11-noFET, tweaked values in MD11-FET build tooSelene ToyKeeper2021-09-242-3/+46
| | | | | |
* | | | | | added dynamic PWM and FET to MD11Selene ToyKeeper2021-09-241-14/+25
| | | | | |
* | | | | | just a few adjustments to start withSelene ToyKeeper2021-09-241-12/+11
| | | | | |
* | | | | | copied Noctigon K1 -> MD11 to start defining a new lightSelene ToyKeeper2021-09-241-0/+61
| | | | | |
| | | | | * Tweak a few MT35Mini settingsGabriel Hart2022-01-293-2/+54
| | | | | |
| | | | | * Experimental: add optional delay when using LED_ENABLE_PIN to avoid flashes ↵Gabriel Hart2022-01-052-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | of light (this time for LED2_ENABLE pin)
| | | | | * Experimental: add optional delay when using LED_ENABLE_PIN to avoid flashes ↵Gabriel Hart2022-01-042-1/+11
| | | | |/ | | | | | | | | | | | | | | | of light
| | | | * Merge TKs changes through her commit 628Gabriel Hart2021-10-297-67/+137
| | | | |\ | | |_|_|/ | |/| | |
| * | | | Clarified Ramp->2C behavior a bit more.Selene ToyKeeper2021-10-281-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | (old wording was confusing people)
| * | | | fixed too-slow thermal regulation bug introduced in d4sv2-tintramp branchSelene ToyKeeper2021-10-251-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (2021-09-10 r619.1.11) The gradual_target var was getting clobbered and causing thermal regulation to stop until the next thermal warning event, every time it reached a new ramp step. So... save/restore it to prevent it from getting clobbered.
| * | | | don't blink when toggling tintSelene ToyKeeper2021-10-141-1/+1
| | | | |
| * | | | don't hardcode 2.9V for aux LED shutoffSelene ToyKeeper2021-10-091-1/+1
|/ / / / | | | | | | | | | | | | | | | | (use the same value as LVP; easier to configure if it's in only one place)
* / / / added attiny type to the MODELS file, rewrote how MODELS file gets generatedSelene ToyKeeper2021-09-223-60/+128
|/ / / | | | | | | | | | | | | (because it's kind of important to know which MCU each light uses, and because this will be helpful later when the build system is rewritten)
| | * Add thefreeman's DAC linear driver (beta); also update Sofirn bilds to use ↵Gabriel Hart2021-10-295-7/+52
| | | | | | | | | | | | the new 2C_STYLE defines
| | * SP10 Pro: lower AA LVP to 0.7vGabriel Hart2021-09-201-1/+1
| |/
| * SP10 Pro: use dynamic PWM, add hidden firefly, adjust candle amplitude, and ↵Gabriel Hart2021-09-192-13/+17
| | | | | | | | tweak party strobe & LVP level
| * Merge TK changes thru rev 623 (2021-09-17)Gabriel Hart2021-09-1927-188/+766
| |\ | |/ |/|
* | clarified where brightness level comes from in beacon/sos/momentary modesSelene ToyKeeper2021-09-171-6/+6
| |
* | merged K9.3-tintramp / D4Sv2-tintramp branchSelene ToyKeeper2021-09-1513-85/+418
|\ \ | | | | | | | | | | | | | | | (which also changed the way tint ramping is implemented, to make things generally cleaner and more flexible)
| * | added Noctigon K9.3-tintramp build targets for FET, reduced FET, and noFETSelene ToyKeeper2021-09-153-0/+157
| | | | | | | | | | | | | | | | | | | | | (apparently Hank liked the D4Sv2-tintramp demo/experiment so much that he decided to use it in production for the K9.3... so it need its own builds since it's a pretty different light even if the driver is almost identical)
| * | fixed wrong value on D4Sv2-tintramp ramp calculator (was off by one)Selene ToyKeeper2021-09-151-3/+3
| | |
| * | fixed builds which failed due to being too big (rot66, mf01-mini)Selene ToyKeeper2021-09-102-0/+4
| | | | | | | | | | | | | | | | | | by turning off one more of the recent extra features (can turn it back on later if the build size goes down)
| * | fixed K9.3 builds (oops, new update_tint() needed to be compiled out for K9.3)Selene ToyKeeper2021-09-102-2/+2
| | |
| * | fixed blf-lantern-t1616 build... I thinkSelene ToyKeeper2021-09-101-16/+2
| | | | | | | | | | | | | | | (can't test because I have no hardware, but it at least compiles)
| * | fixed ancient bug which caused a weird up-spike in thermal regulation during ↵Selene ToyKeeper2021-09-101-4/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | initial turbo drop, on 3-channel drivers like FW3A and ROT66 (as shown here: http://toykeeper.net/torches/fw3a/therm-2019-05-22.1.png ) What happened was... the FET would start to drop, but gradual adjustments noticed that the Nx7135 channel needed to go from 0 to 255, so it would then slowly ramp that up, and then afterward, the FET drop could finally continue... because the code didn't jump straight from 0 to 255 like it was supposed to. Simple, easy fix: Make channel 2 go up immediately just like channel 1 does. This makes the thermal response several seconds faster than it was before, so it doesn't get as hot, and is less likely to overshoot and bounce later.
| * | added D4Sv2-tintramp-FET build, which uses a FET on one set of LEDs for ↵Selene ToyKeeper2021-09-103-9/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | turbo modes (it's weird, but Hank wants it) also reworked gradual tint adjustment a bit, so some complex parts go in set_level() instead (probably needs more testing)
| * | changed D4Sv2-tintramp from 255 to 511 for lowest PWM TOP value,Selene ToyKeeper2021-09-081-3/+3
| | | | | | | | | | | | | | | | | | to make its thermal regulation smoother and generally increase tint ramp resolution in middle modes (also, tried thermal regulation, and it works)
| * | got BLF LT1 working again, using new tint-ramping codeSelene ToyKeeper2021-09-082-21/+6
| | |
| * | got D4Sv2 tint ramping to work, with dynamic PWM (PFM)Selene ToyKeeper2021-09-083-72/+107
| | | | | | | | | | | | | | | | | | | | | | | | | | | and (maybe) thermal regulation (untested) (also broke BLF LT1 in the process; need to fix that now) Rewrote how tint ramping works, so it provides a virtual "PWM1_LVL" for other code to use, and it translates that internally into actual hardware controls. This should, in theory, allow smooth thermal regulation (gradual_tick) to work on tint-ramp lights.
| * | copied k9.3 config for new d4sv2-tintrampSelene ToyKeeper2021-09-071-0/+85
| | |
* | | documented "hold" action in number entry stateSelene ToyKeeper2021-09-141-0/+5
| | |
* | | added a hold shortcut in number entry menu: click for +1, hold for +10Selene ToyKeeper2021-09-142-2/+14
|/ /
* | fixed builds which failed to compile after recent changesSelene ToyKeeper2021-08-314-2/+8
| |
* | reduced length of auto-reverse timing window from ~1000 ms to ~660ms, ↵Selene ToyKeeper2021-08-314-3/+6
| | | | | | | | because it was too fast
* | documented recent changes in the user manualSelene ToyKeeper2021-08-311-20/+64
| |
* | made 2C ceiling/turbo behavior configurable in Simple UISelene ToyKeeper2021-08-316-47/+95
| | | | | | | | | | | | | | | | | | | | also made it possible to block turbo in Advanced UI (each one has a 2C style: 0 = no turbo, only ceiling 1 = Anduril 1 style, direct to turbo 2 = Anduril 2 style, ceiling unless already there, then turbo )
* | added third 2C style: 0 = no turbo (but it's still available as momentary)Selene ToyKeeper2021-08-312-2/+10
| | | | | | | | | | (also, adding this reduced the ROM size somehow)
* | added runtime option to choose Anduril 1 or Anduril 2 double-click turbo styleSelene ToyKeeper2021-08-318-17/+55
| | | | | | | | | | | | (2C while on goes to full-power turbo (A1) or ceiling (A2)) also renamed _OPTION defs to _CONFIG for consistency
* | added runtime option to select whether to ramp up after hold-from-off ↵Selene ToyKeeper2021-08-316-11/+49
| | | | | | | | (default) or stay at floor
* | added runtime config option for smooth ramp speedSelene ToyKeeper2021-08-315-21/+61
| |
| * Merge TK's changes thru her rev 618 including autolock in Simple UI and jump ↵Gabriel Hart2021-08-2911-26/+129
| |\ | |/ |/| | | start updates
* | made it possible to use autolock in simple UISelene ToyKeeper2021-08-271-7/+1
| | | | | | | | | | (requires the user to set it up, so it won't happen to new users unless they do it on purpose)
* | added documentation for the global config menu and jump start levelSelene ToyKeeper2021-08-231-0/+26
| |
* | moved jump start into FSM so it'll be more universal and the app won't need ↵Selene ToyKeeper2021-08-2311-40/+39
| | | | | | | | | | | | | | special clauses (also adjusted KR4 jump start levels a bit)
* | made jump start level configurable at runtime, and made it activate in more ↵Selene ToyKeeper2021-08-237-4/+64
| | | | | | | | places
generated by cgit v1.2.3 (git 2.25.1) at 2026-03-29 18:08:37 +0000